BICSI-INSTALLER 1 EXAM LATEST 2023-2024 ACTUAL
EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
Mechanical fire stop systems are durable while also...
A. Providing waterproofing
B. Maintaining their pliability
C. Providing sealing for knockouts and openings in the fixture
D. Exhibiting the ability to expand when it makes contact -
ANSWER--Providing waterproofing
Which piece of hardware connects two fibers together in a plug-
to-plug?
A. Array connectors
B. Couplers
C. Double strand connectors - ANSWER--Couplers
Which of the following steps should be performed FIRST when an
installer is pulling optical fiber cable?
A. Label the optical fiber cables
B. Ensure the cable has been tested and accepted
C. Install and secure innerduct
D. Attach cables to pull rope - ANSWER--Ensure the cable has
been tested and accepted
, BICSI-INSTALLER 1 EXAM LATEST 2023-2024 ACTUAL
EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
What is the FIRST step when installing a poke-thru?
A. Connect pathway, if applicable, and cabling runs to poke-thru
device.
B. Verify that the floor opening for the poke-thru device is in the
correct location and of the correct size.
C. Install the poke-thru device per the manufacturer's
recommended installation instructions
D. Verify that the poke-thru device to be installed is correct based
on specifications in the contract documents and any listing
markings indicating compliance with applicable codes and AHJ
requirements. - ANSWER--Verify that the floor opening for the
poke-thru decide is in the correct location and of the correct size
How do fire stops made of elastomeric materials function?
A. They are sized to fit the opening being sealed and they absorb
the heat from flames, preventing the temperature from rising on
the other side of the seal.
B. They are sized to fit the opening being sealed and they swell
around and within the penetration to provide a tight seal.
EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
Mechanical fire stop systems are durable while also...
A. Providing waterproofing
B. Maintaining their pliability
C. Providing sealing for knockouts and openings in the fixture
D. Exhibiting the ability to expand when it makes contact -
ANSWER--Providing waterproofing
Which piece of hardware connects two fibers together in a plug-
to-plug?
A. Array connectors
B. Couplers
C. Double strand connectors - ANSWER--Couplers
Which of the following steps should be performed FIRST when an
installer is pulling optical fiber cable?
A. Label the optical fiber cables
B. Ensure the cable has been tested and accepted
C. Install and secure innerduct
D. Attach cables to pull rope - ANSWER--Ensure the cable has
been tested and accepted
, BICSI-INSTALLER 1 EXAM LATEST 2023-2024 ACTUAL
EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
What is the FIRST step when installing a poke-thru?
A. Connect pathway, if applicable, and cabling runs to poke-thru
device.
B. Verify that the floor opening for the poke-thru device is in the
correct location and of the correct size.
C. Install the poke-thru device per the manufacturer's
recommended installation instructions
D. Verify that the poke-thru device to be installed is correct based
on specifications in the contract documents and any listing
markings indicating compliance with applicable codes and AHJ
requirements. - ANSWER--Verify that the floor opening for the
poke-thru decide is in the correct location and of the correct size
How do fire stops made of elastomeric materials function?
A. They are sized to fit the opening being sealed and they absorb
the heat from flames, preventing the temperature from rising on
the other side of the seal.
B. They are sized to fit the opening being sealed and they swell
around and within the penetration to provide a tight seal.
