TestOut Network Pro Ch 1 and 2 (1.1.5,
1.2.3, 1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4,
2.3.4, 2.4.8, 2.5.7) Exam
You have implemented a network where each device provides shared files with all other
devices on the network.
What type of network do you have? - Answer- Peer-to-peer
You have implemented a network where hosts are assigned specific roles, such as for
file sharing and printing. Other hosts access those resources but do not host services of
their own.
What type of network do you have? - Answer- Client-server
Which of the following geographic network types are typically managed by a city as a
public utility? - Answer- Metropolitan Area Network (MAN)
You have a network that uses a logical ring topology. How do messages travel through
the network? - Answer- Messages travel from one device to the next until they reached
the destination device.
You have a network that uses a logical bus topology. How do messages travel through
the network? - Answer- Messages are broadcast to all devices connected to the
network.
Which of the following topologies connects all devices to a trunk cable? - Answer- Bus
Which of the following topologies connects each device to a neighboring device? -
Answer- Ring
In which of the following topolgies does each device on the netowrk act as a repeater,
sending the signal to the next device? - Answer- Ring
Which of the following topologies connects each network device to a central hub? -
Answer- Star
You have implemented an ad-hoc wireless network that doesn't employ a wireless
access point. Every wireless network card can communicate directly with any other
wireless network card on the network.
, What type of physical network topology has been implemented in this type of network? -
Answer- Mesh
You have been asked to implement a network infrastructure that will accommodate
failed connections. Which of the following network topologies provides redundancy for a
failed link? - Answer- Mesh
You want to implement a fault tolerant topology as you interconnect routers on your
wide area netowrk. Which of the following would meet your needs? - Answer- Mesh
What device is used to create a physical star topology? - Answer- Switch or hub
You have a small network that uses a hub to connect multiple devices. What physical
topology is used? - Answer- Star
You have been asked to implement a wired network infrastracture that will
accommodate fialed conenctions. You don't have a large budget, so you decide to
provide redundancy for only a handful of critical devices.
Which of the following netowork topologies should you implement? - Answer- Partial
Mesh
Which two of the following are included as part of the Data Link Layer? - Answer- -
Identifying physical network device
-Controlling how messages are propagated through the network
In the OSI Model, what is the primary function of the Network Layer? - Answer- Routes
messages between networks
In the OSI Model, which of the following functions are performed at the Presentation
Layer? - Answer- -Specify data format
-Encrypt and compress data
In the OSI Model, which of the following functions are performed at the Application
Layer? - Answer- -Integration of network functionality into the host operating system
-Enabling communication between network clients and services
Which of the following functions are performed at the Physical Layer of the OSI Model?
- Answer- Movement of data across network cables
The Data Link Later of the OSI Model is comprised of two sublayers.
What are they? - Answer- -LLC
-MAC
1.2.3, 1.3.6, 1.4.4, 1.5.5, 1.6.3, 2.1.4, 2.2.4,
2.3.4, 2.4.8, 2.5.7) Exam
You have implemented a network where each device provides shared files with all other
devices on the network.
What type of network do you have? - Answer- Peer-to-peer
You have implemented a network where hosts are assigned specific roles, such as for
file sharing and printing. Other hosts access those resources but do not host services of
their own.
What type of network do you have? - Answer- Client-server
Which of the following geographic network types are typically managed by a city as a
public utility? - Answer- Metropolitan Area Network (MAN)
You have a network that uses a logical ring topology. How do messages travel through
the network? - Answer- Messages travel from one device to the next until they reached
the destination device.
You have a network that uses a logical bus topology. How do messages travel through
the network? - Answer- Messages are broadcast to all devices connected to the
network.
Which of the following topologies connects all devices to a trunk cable? - Answer- Bus
Which of the following topologies connects each device to a neighboring device? -
Answer- Ring
In which of the following topolgies does each device on the netowrk act as a repeater,
sending the signal to the next device? - Answer- Ring
Which of the following topologies connects each network device to a central hub? -
Answer- Star
You have implemented an ad-hoc wireless network that doesn't employ a wireless
access point. Every wireless network card can communicate directly with any other
wireless network card on the network.
, What type of physical network topology has been implemented in this type of network? -
Answer- Mesh
You have been asked to implement a network infrastructure that will accommodate
failed connections. Which of the following network topologies provides redundancy for a
failed link? - Answer- Mesh
You want to implement a fault tolerant topology as you interconnect routers on your
wide area netowrk. Which of the following would meet your needs? - Answer- Mesh
What device is used to create a physical star topology? - Answer- Switch or hub
You have a small network that uses a hub to connect multiple devices. What physical
topology is used? - Answer- Star
You have been asked to implement a wired network infrastracture that will
accommodate fialed conenctions. You don't have a large budget, so you decide to
provide redundancy for only a handful of critical devices.
Which of the following netowork topologies should you implement? - Answer- Partial
Mesh
Which two of the following are included as part of the Data Link Layer? - Answer- -
Identifying physical network device
-Controlling how messages are propagated through the network
In the OSI Model, what is the primary function of the Network Layer? - Answer- Routes
messages between networks
In the OSI Model, which of the following functions are performed at the Presentation
Layer? - Answer- -Specify data format
-Encrypt and compress data
In the OSI Model, which of the following functions are performed at the Application
Layer? - Answer- -Integration of network functionality into the host operating system
-Enabling communication between network clients and services
Which of the following functions are performed at the Physical Layer of the OSI Model?
- Answer- Movement of data across network cables
The Data Link Later of the OSI Model is comprised of two sublayers.
What are they? - Answer- -LLC
-MAC
