BECC Mod 2 Questions and Correct Answers,
With Complete Solution.
How long are engineering legal records retained onboard for?
3 years
How long are operational logs maintained for?
6 months
what is the record where all speed changes for each individual shaft are
recorded?
bell book
what log is maintained in dc central
damage control closure log
What log records day to day events in the engineering plant
the engineering log
responsible for physical security of the main reduction gear?
engineer officer
watch fire and flooding get reported to
sounding and security watch
in port watch in charge of physical security of the ship and takes control of
security forces
CDO
What program is used to safeguard the ship from sabotage?
physical security program
What device is a positive stop used to prevent inadvertent manipulation?
a locking device
the use of EOSS is
mandatory
What are the 3 parts of an EOSS?
the EOSS users guide, EOP, EOCC
What 2 actions of the EOCC that must be memorized
controlling and immediate actions
4 actions EOCC
controlling, immediate, supplementary, restore casualty
used to alert personnel to an action that if not strictly adhered to may result in
injury to personnel
warning
who uses master plant procedures
EOOW, OOD, SPACE SUPERVISOR
table that displays proper valve alignment for various tanks
tank tables
What part of EOP provides tank capacities
tank status diagram
What document provides standardized procedures tailored to each ship
EOSS
, What chart helps keep track of what equipment is on line
status chart
why is oil in bilges considered hazardous
generate vapors that can ignite with a spark or open flame
parts per million of oily waste that is sufficient to cause a sheen
15-20
Mark 2 spill kit location
main deck
complete discontinuation of all discharges of oily waste
OPA
manual details safety precautions for handling asbestos
asbestos control program
how long is a gas free certificate good for
8 hours
document posted at entrance of any tank or void not normally manned
gas free certificate
ORM stands for
operational risk management
5 steps of ORM
identify, assess, making risk decisions, implement controls, supervise
material used to seal moving joints
packing
material used to seal fixed joints
gasket
high temp, high pressure
raised face
low temp, low pressure
flat face
What digit in 4 digit symbol indicates if material is used for a mixed joint or
moving joint
1st digit
What is the purpose of the EOCC
Procedures for responding to and controlling commonly occurring casualties
What are the four basic actions of a casualty procedure
Control actions
Immediate actions
Supplement actions
Restoration actions
Where is the master copy of the EOSS located on board your ship
Engineering log room
What is the difference between simplex gauge and a duplex gauge?
Simplex one bourbon tube, one needle, the displayed pressure is from one connection
Duplex two bourbon tubes, two needles and the displayed pressure is from two
connections
What is the purpose of the gauge calibration program?
With Complete Solution.
How long are engineering legal records retained onboard for?
3 years
How long are operational logs maintained for?
6 months
what is the record where all speed changes for each individual shaft are
recorded?
bell book
what log is maintained in dc central
damage control closure log
What log records day to day events in the engineering plant
the engineering log
responsible for physical security of the main reduction gear?
engineer officer
watch fire and flooding get reported to
sounding and security watch
in port watch in charge of physical security of the ship and takes control of
security forces
CDO
What program is used to safeguard the ship from sabotage?
physical security program
What device is a positive stop used to prevent inadvertent manipulation?
a locking device
the use of EOSS is
mandatory
What are the 3 parts of an EOSS?
the EOSS users guide, EOP, EOCC
What 2 actions of the EOCC that must be memorized
controlling and immediate actions
4 actions EOCC
controlling, immediate, supplementary, restore casualty
used to alert personnel to an action that if not strictly adhered to may result in
injury to personnel
warning
who uses master plant procedures
EOOW, OOD, SPACE SUPERVISOR
table that displays proper valve alignment for various tanks
tank tables
What part of EOP provides tank capacities
tank status diagram
What document provides standardized procedures tailored to each ship
EOSS
, What chart helps keep track of what equipment is on line
status chart
why is oil in bilges considered hazardous
generate vapors that can ignite with a spark or open flame
parts per million of oily waste that is sufficient to cause a sheen
15-20
Mark 2 spill kit location
main deck
complete discontinuation of all discharges of oily waste
OPA
manual details safety precautions for handling asbestos
asbestos control program
how long is a gas free certificate good for
8 hours
document posted at entrance of any tank or void not normally manned
gas free certificate
ORM stands for
operational risk management
5 steps of ORM
identify, assess, making risk decisions, implement controls, supervise
material used to seal moving joints
packing
material used to seal fixed joints
gasket
high temp, high pressure
raised face
low temp, low pressure
flat face
What digit in 4 digit symbol indicates if material is used for a mixed joint or
moving joint
1st digit
What is the purpose of the EOCC
Procedures for responding to and controlling commonly occurring casualties
What are the four basic actions of a casualty procedure
Control actions
Immediate actions
Supplement actions
Restoration actions
Where is the master copy of the EOSS located on board your ship
Engineering log room
What is the difference between simplex gauge and a duplex gauge?
Simplex one bourbon tube, one needle, the displayed pressure is from one connection
Duplex two bourbon tubes, two needles and the displayed pressure is from two
connections
What is the purpose of the gauge calibration program?
