4th TSSA Part A (I) Questions with 100% answers.

4th TSSA Part A (I) Questions with 100% answers. A process flow diagram (PFD) shows: - Major piping to do with a process (4-017-1.1) Which of the following statements about belt drive systems is FALSE? - Tension in the bottom belt is always double that in the top belt. (4-001-1.9) Power engineers can usually expect to work: - Rotating shifts (4-117-2.4) The refrigeration condenser design that requires the tubes to be cleaned with acid and then neutralized, is the: - Shell and coil condenser What code contains Rules For Construction of Power Boilers? - ASME Section I. Modular PLC's can be expanded by adding___________. - cards This regulation lists the requirements which must be met for anyone wishing to write an applicable jurisdictional examination. - Power Engineers Regulation (4-078-2.3) An open circuit is one in which: - A switch is open The boiler MAWP determines: - The strength of the drum or shell The letters LAL inside a circle on a P&ID stands for : - Level alarm low (4-055-4.4) Tubes for high pressure service are usually: - Seamless construction An area in which the atmosphere contains dust in concentrations high enough to produce explosive or ignitable mixtures, has an Electrical Classification of: - Class 2 The receiver of a safety work permit: - Should work with the Safe Work Permit issuer to ensure a safe work site (4-055-4.2) Beading the tube ends in a firetube boiler: - helps prevent overheating of the tube ends