WGU D315 - PRE-ASSESSMENT: NETWORK AND SECURITY – FOUNDATIONS accurate 100%

WGU D315 - PRE-ASSESSMENT: NETWORK AND SECURITY – FOUNDATIONS accurate 100%Which OSI layer is related to the function of the IP protocol suite? a. Transport b. Network c. Data Link d. Session - ANSWER Network Which OSI layer is responsible for organizing how bits are passed over the physical layer between devices within the same collision domain? a. Frame b. Connection c. Transport d. Data Link - ANSWER Data Link Which OSI layer would define the scope of a protocol that makes sure packets of data are received correctly and resends them if they are not? a. Validation b. Transmission c. Transport d. Connection - ANSWER Transport Which protocol suite performs functions of OSI layer 4? a. IPX b. MAC c. CSMA/CD d. TCP - ANSWER TCP Which type of Ethernet cable can maintain 10Gbps transmission speeds through the course of its maximum 100-meter length? a. CAT 5e b. CAT 5 c. CAT 3 d. CAT 6a - ANSWER CAT 6a Which Internet access technology uses ordinary telephone wires for data transmission? a. DSL b. Cable c. Wi-Fi d. Hotspot - ANSWER DSL Which device is used to organize network cables as they run between switches and other network devices? a. Jack b. Hub c. Patch Panel d. Router - ANSWER Patch Panel Which network device is used to connect two or more network segments by performing OSI layer 3 functions like packet-forwarding? a. Router b. Repeater c. Wire d. Switch - ANSWER Router Which network device is used to convert between digital information from a LAN and analog signals for transmission over a standard telephone wire? a. Repeater b. Modem c. Signal Generator d. Bit Stretcher - ANSWER Modem Which device could be used to send commands to the mainframe for remote execution in early mainframe installations? a. Distributed Screens b. Dumb Terminals c. Execution Displays d. Command Receivers - ANSWER Dumb Terminals Which device is responsible for implementing network address translation (NAT)? a. Modem b. Router c. NIC d. Switch - ANSWER Router Which command produces the following output? Non-authoritative answer: Name: Address: 172.217.11.132 a. dig b. nslookup d. whois d. nmap - ANSWER nslookup Which command should be used to manually enter the default gateway for a computer? a. route b. ipconfig c. arp d. netstat - ANSWER route Which network diagnostic tool displays the path packets take between two endpoints? a. ifconfig b. traceroute c. ftp d. nslookup - ANSWER traceroute Which network type is used to wire multiple PCs to a home router? a. LAN b. PAN c. MAN d. WAN - ANSWER LAN An office's infrastructure connects network devices and printers through a central access point without the use of cabling. Which network type does this office use? a. WLAN b. WAN c. CAN d.