Neiep 200 Final Review (Questions And Answers) 2024/2025 Updated

Neiep 200 Final Review (Questions And Answers) 2024/2025 Updated Which lay of wire rope has the strand wires in line with the rope axis? - CORRECT ANSWER-Regular Lay At what speed should the counterweight safeties be set to trip? - CORRECT ANSWERUp to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? - CORRECT ANSWER-Type C What is the purpose of the terminal motion switch? - CORRECT ANSWER-slow down and stop the car automatically at or near the top or bottom landing If you have a 3500 lb. car rated at 4000 lbs. capacity, how much should the counterweight assembly weigh for a normal 40% installation? - CORRECT ANSWER5100 lbs. When the pit directional limit switch is actuated, the normal circuits will allow the car to run - CORRECT ANSWER-Up _______should not be disassembled in the field. - CORRECT ANSWER-Oil Buffers The loss of traction between the hoist ropes and the machine driver when the counterweight lands on its buffer avoids... - CORRECT ANSWER-The elevator car being pulled into the over head. Refer to Table 1. With a safety factor of 5, what is the breaking strength for 1 1/8" nylon rope? - CORRECT ANSWER-52,000 lbs. Which of the following applies to rope usage? - CORRECT ANSWER-Prevent manila rope from unraveling by using whipping. What does the designation 3/8" 6 X 30 improved plow steel mean? - CORRECT ANSWER-It is a high strength cable with 6 strands composed of 30 wires per strand? When using Crosby clips, which of the following statements is correct? - CORRECT ANSWER-To determine the correct minimum spacing multiply the rope diameter times 6