Neiep 200 Final Study Guide Exam 2024/2025

Neiep 200 Final Study Guide Exam 2024/2025 ____________ ____________ should not be disassembled in the field - CORRECT ANSWER-Oil buffers Two safety precautions to be followed when first entering the elevator pit are to have the ___________ ___________ ___________open and the pit light on. - CORRECT ANSWER-Pit stop switch Tension on the governor rope is maintained by using a - CORRECT ANSWER-Tension sheave The ASME Safety Code requires oil buffers for elevators when traveling at a car speed of - CORRECT ANSWER-Over 200 FPM If the pit extends more than ______ feet below the sill of the access door, a fixed vertical ladder shall be located within reach of the access door. - CORRECT ANSWER3 If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be required? Add 10% to the weight of the load for each sheave. - CORRECT ANSWER175 lbs. OSHA requires that slings used for hoisting be inspected at what intervals? - CORRECT ANSWER-Each day before using Spring buffers are used only when the elevator travels at ___________ FPM or less. - CORRECT ANSWER-200 All measurements necessary for the installation of various components in the pit are measured with reference to the - CORRECT ANSWER-guide rails ASME Safety Code requires that a fully compressed oil buffer should return to its normal position within _________ seconds after the elevator car or counterweight has been removed. - CORRECT ANSWER-90 Wood used to construct a hoisting support must be - CORRECT ANSWER-scaffold grade What is a sign of poor quality manila rope? - CORRECT ANSWER-Dark colored fibers (True/False) All synthetics are impervious to sunlight. - CORRECT ANSWER-False