NEIEP 200 Final Exam Test (Questions With Correct Solutions 2024/2025)

NEIEP 200 Final Exam Test (Questions With Correct Solutions 2024/2025) What type of wrench is used to align the holes for rail installation? - CORRECT ANSWER-Spud wrench Which of the following statements applies to using adjustable wrenches? a. Rotate the wrench so the applied force is against the adjustable jaw b. Rotate the wrench so the applied force is against the fixed jaw c. Adjustable wrenches can only be used on square head bolts - CORRECT ANSWERa. Rotate the wrench so the applied force is against the adjustable jaw Which of the following statements is correct regarding ladders? a. Fiberglass ladders are less expensive than wood ladders b. The maximum practical length for a single section wood ladder is 24' c. Metal ladders should never be used - CORRECT ANSWER-c. Metal ladders should never be used Which of the following devices is most useful to raise and jockey heavy equipment? a. Mover's Dolly b. Pry bar lever truck c. Platform truck - CORRECT ANSWER-b. Pry bar lever truck Which of the following is correct about the use of pipe wrenches? a. They are a god choice if the pipe surface cannot be marred or scratched b. They will not damage bolt heads c. The jaws must be open facing the direction you want the pipe to turn. - CORRECT ANSWER-c. The jaws must be open facing the direction you want the pipe to turn. Which type of wrench is used to thread pipes with polished surfaces together? - CORRECT ANSWER-Strap wrench Which screwdriver is used to remove tamper proof screws? - CORRECT ANSWERTamper proof Which type of pliers is useful for cutting and gripping materials? - CORRECT ANSWERLineman's pliers Which tool may be color coded to help with identifying the correct size? - CORRECT ANSWER-Nut drivers Which of the following statements applies to the use of hacksaws on the job? a. Hacksaw blades must be installed with the teeth facing forward. b. Using light pressure when cutting with a hacksaw will speed up the cutting. c. Chisel a notch on the metal surface as a starting point when using a hacksaw. - CORRECT ANSWER-a. Hacksaw blades must be installed with the teeth facing forward. What type of drill bit is best suited for drilling in concrete? - CORRECT ANSWERCarbide tipped What type of lumber must be used for decking on scaffolding? - CORRECT ANSWERScaffold grade When erecting scaffolding, which of the following is important? a.Wooden planks must be cut flush to the edge of the scaffold end frame. b. Wooden planks must be cleated c. Use rollers when set up on dirt or backfill. - CORRECT ANSWER-b. Wooden planks must be cleated What safety precaution is most important when using rollers to move heavy equipment? a. Pipe rollers must be picked up by the hollow inner part b. Never use wooden rollers c. Metal rollers must be made of solid stock - CORRECT ANSWER-a. Pipe rollers must be picked up by the hollow inner part