BECC Test 1 Updated Questions and Answers 2024 Solved 100%

BECC Test 1 Updated Questions and Answers 2024 Solved 100% •T or F When a valve is removed for maintenance and blank flanges are installed, the flanges are required to be changed out. true •T or F PQS sets a minimum standard for knowledge and skills that must be attained for the for a watchstation. true •Who updates and maintains the PQS progress Charts? •Work Center Supervisor •The PQS progress chart is reviewed by ____ and on a ____ basis. •Division Officer, Weekly •Which of the following sections of the PQS book contains the basic knowledge needed to understand duties to be performed? fundamentals •Who is authorized to sign off individual line items in the PQS book? Qualifiers •Which of the following are used to retrieve small items that fall into places unreachable by hand? •Flexible retrieving tools •The type of wrench that requires calibration for accuracy is the ____ wrench. Torque •It is not is not safe to operate electrical power tools in the area where ____ are present. •Flammable gasses •Electrical power tools must be inspected prior to use by a qualified ____. •Electrician Torque wrenches are used to measure ____. •Foot or inch lbs •T or F Torque wrench has to be tested and calibrated for accuracy? •True •The time required to complete all maintenance listed listed on the EGL should not exceed ____ hours. 8 •T or F The PMs masterfile contains maintenance requirement info that pertains to all equipment of a command. True •The effective use of available manpower and material resources is the objective of the ____. •3M system •* What provides a listing of all maintenance index pages (MIPs) to a particular work center? •List of effective pages (LEOP) •Which of the following provides detailed procedures for performing preventive maintenance? •MRC •The person responsible for managing the 3-M system is the____. •Executive officer •The person responsible to the XO for all administrative facets of the 3-M system is the____. •3-m coordinator The periodically 2D code on the MRC means that the particular maintenance requirement must be accomplished... Every two days •Which of the following lists contain the components required to be "tagged out" for a specific PMS check? •Tag-out guide list (TGL) •The weekly schedule is updated by the ____. •Work center supervisor •If a MRC procedure is incorrect, notify the ____. •Work center supervisor •T or F The person attaching the tags may sign them before they are hung. •False •What type of hearing protection is required when the average noise levels in the space are greater than 104 db? •Insert type and circumfural muffs Single hearing protection is required when continuous noise levels are greater than ____ •84 db. •Section 1 of the tag-out log includes ____. •Users manual and intro for tag out •Section 2 of the tag-out log includes ____. •Tag -out index and record of audits •Section 3 of the tag-out log includes ____. •Active caution and danger tag record sheets •Section 4 of the tag-out log includes ____. •Instrument log/out of commission and out of calibration section 5 of the tag-out log includes Cleared caution and danger tag record sheets