MSSC CPT Quality Test Questions 100% Solved(graded A)

MSSC CPT Quality Test Questions 100While on the production floor, what is audited? -ANSWER Measurement tool calibration One of the most important reasons for a checklist in an "in-process" audit is to -ANSWER Obtain relatively uniform results Consider the statement, "Even if corrective action is taken immediately for a finding during the audit, all significant deficiencies should be detailed in the written report." This statement is -ANSWER True, because the auditor is responsible for an accurate report of all findings A basic requirement of a third party audit organization is that it is conducted by -ANSWER Someone outside of the organization The purpose of a quality audit program is to -ANSWER Ensure that procedures and processes are followed The specific effect of a quality assurance system on a manufacturing department can be measured by -ANSWER Number of defects A worker is filling in while the supervisor is on vacation, and is responsible for keeping track of a pH level of a cleaning process. The worker does not understand one of the items to be filled in. What should he/she do? -ANSWER Ask for help End-item product audits will directly measure the -ANSWER Outgoing product quality A Corrective Action Report was submitted to prevent using the wrong ink in a making process. This has been a recurring problem. The normal audit time in this department is usually every six months. What should be done in this situation? -ANSWER The ink color should be checked every time it is replenished and documented To ensure continued accuracy, inspection must be periodically -ANSWER Calibrated Adjusting an instrument or device to a standard is called -ANSWER Calibration In general, how often a surface finish gage be mastered/calibrated? -ANSWER As dictated by company standards Which of the following is the basis for establishing calibration intervals? -ANSWER Reliability What is the most important item to appear on the calibration label of a tool that is used to measure and test equipment? -ANSWER The date the tool is due for calibration The most important measure of external quality is product performance as viewed by the -ANSWER Customer Within a company, a quality metric is used to -ANSWER Establish measurements for process improvements Quality assurance systems include many important components, including -ANSWER Continuous improvement policies and procedures When investing a problem, it is best to -ANSWER Use all available information resources Brainstorming, cause and effect diagrams, and root cause analysis are all -ANSWER Problem analysis tools A surface plate is always -ANSWER used as a reference surface Inspection Documentation Forms include the following information -ANSWER Standards and specifications for conformance and results of the inspection A shipment of plated fasteners has been received from a familiar vendor, but there was no certification with the shipment. The receiving inspector should -ANSWER Put a hold tag on the shipment and inform purchasing immediately Parts that are labeled with a red tag - "HOLD" -ANSWER Require additional inspection The indicator shown has been mastered using a part that measure 3.100 inches in length. What is the actual length of the part shown below? -ANSWER 3.250 inches (review sheet for more info) Design Failure Mode and Effect Analysis (DFMEA) should be conducted -ANSWER As early as possible in the design process Which of the following instruments is used for measuring proper torque? -ANSWER Cali % Solved(graded A)