LIQUID PENETRANT LEVEL II SPECIFIC EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+

LIQUID PENETRANT LEVEL II SPECIFIC EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ Who is the Custodian of the document named NAS410? Correct Answer: National Aerospace Non-Destructive Testing Work Group. A limited certification allowing only the performance of a specific NDT test on a specified part: Correct Answer: Level 1-Limited. According to the NAS-410 what are the minimum formal training hours for Level I certification in Penetrant testing? Correct Answer: 16. The responsible Level 3 or NANDTB shall maintain overall control and cognizance over the NDT training program, including designating or approving qualified Examiners, instructors and outside agencies. Correct Answer: True. 2 Certification shall be revoked when? Correct Answer: Both A and B. If equipment operation or accepting hardware is required as a part of the Level 3's duties. Correct Answer: An additional hands-on practical examination equivalent to Level 2 is required. How many points are awarded for being the sole author of NDT papers according to the NAS-410? Correct Answer: 8. What Joint Service Manual is for Non-Destructive Testing? Correct Answer: T.O.33B-1-1. A level I or II certification is valid for a period of _____________ years, at which point the personnel must be re-certified. Correct Answer: 5 years. According to T.O. 33B-1-1, dwell times for suspected stress corrosion cracking shall be: Correct Answer: Not less than 240 minutes. 3 Linear indications are defined as: Correct Answer: Penetrant indications with at least 3 to 1 length to width ratio. How does AMS 2644 classify penetrant developers? Correct Answer: Form. Class 2 solvent removers are non-halogenated. Correct Answer: True. How are non-aqueous developers always applied? Correct Answer: Spraying. Which of the following is the most common source for black lights? Correct Answer: High pressure, mercury vapor