PA safety inspection Questions and Verified Solutions
Safety Inspection This is issued only when the station is properly equipped and has certified personnel make inspections and corrections. Answer: Certificate of Appointment For what reason could an appointment for a certificate be denied?? Answer: If there is prior involvement with a suspended inspection station. Can you replace a temporary inspection certificate if you did not perform the original inspection?? Answer: No! Who's responsibility is it to affix the certification of inspection to the vehicle once it has passed inspection?? Answer: The certified mechanic who did the inspection. On a motor vehicle, where should the certificate of inspection be placed?? Answer: In an upright position to the lower eft-hand inside corner of the windshield (on the drivers side). On a motorcycle, where should the certificate of inspection be placed?? Answer: On the left side of the front fork, on the left side of the front fender, or on the left side of a plate attached by weld or rivets. Should you remove the old certificate before applying a new one?? Answer: Duh. On trailers, where should the certificate of inspection be placed?? Answer: To the left front of the trailer, approx. 6 feet high if possible. A holder is allowed if in the right place.
Geschreven voor
- Instelling
- PA safety inspection
- Vak
- PA safety inspection
Documentinformatie
- Geüpload op
- 26 maart 2024
- Aantal pagina's
- 4
- Geschreven in
- 2023/2024
- Type
- Tentamen (uitwerkingen)
- Bevat
- Vragen en antwoorden
Onderwerpen
-
pa safety inspection questions and verified soluti