Woodshop Test Questions With 100% Correct Answers
Safety instructions must be given before allowed to work/operate on any machine or
Tool
You're not permitted to work on any equipment/machine if the instructor is not
Present
Guards and safety devices must be on all machines during
Operation
Machinery must not be oiled or adjusted while in
Use
A machine must be started and stopped only by the
Operator
Do not leave a machine while it is
Running
When working on or near any machine or tool where there's a possibility of eye injury, you must wear
Eye protection
You are not permitted within the safety zone around any machine unless you are the
Operator
Loose clothing must be tucked in before you start work, as a precaution against
Getting tangled
If in doubt about any machine, check with the
Instructor
Aisled and working areas must be kept clear of
All obstructions
The shop floor must be kept free of oil because of danger of fire and
Slipping
Combustible rags must be kept in a closed
Red container
Do not lift materials heavier than your ability to handle them
, Safely
Long pieces of material should be carried by
2 people
The attention of the instructor should be directed to any violation of
The Rules
Accidents, no matter how slight, must be reported immediately to the
Instructor
Carry sharp-pointed tools pointed
Downward
Do not leave tools and materials ____ from a vise or bench
clamped
A dull tool is dangerous because it will
Skip
Pass tools to classmates with the tool handles
Toward them
Do not stand in front of anyone using a sharp
Tool
Carry a hand saw by the handle with the toe
Pointed downward
When using a screwdriver, avoid holding the material in the
Hand
After clamps have been applied to the work, it should not be
Moved
Face shields or goggles/glasses must be worn by shop students when there's a possibilty of
Loose Debris
Whenever possible, the ____ should be clamped
Project stock
All adjustments should be made before the machine is
Turned on
Safety instructions must be given before allowed to work/operate on any machine or
Tool
You're not permitted to work on any equipment/machine if the instructor is not
Present
Guards and safety devices must be on all machines during
Operation
Machinery must not be oiled or adjusted while in
Use
A machine must be started and stopped only by the
Operator
Do not leave a machine while it is
Running
When working on or near any machine or tool where there's a possibility of eye injury, you must wear
Eye protection
You are not permitted within the safety zone around any machine unless you are the
Operator
Loose clothing must be tucked in before you start work, as a precaution against
Getting tangled
If in doubt about any machine, check with the
Instructor
Aisled and working areas must be kept clear of
All obstructions
The shop floor must be kept free of oil because of danger of fire and
Slipping
Combustible rags must be kept in a closed
Red container
Do not lift materials heavier than your ability to handle them
, Safely
Long pieces of material should be carried by
2 people
The attention of the instructor should be directed to any violation of
The Rules
Accidents, no matter how slight, must be reported immediately to the
Instructor
Carry sharp-pointed tools pointed
Downward
Do not leave tools and materials ____ from a vise or bench
clamped
A dull tool is dangerous because it will
Skip
Pass tools to classmates with the tool handles
Toward them
Do not stand in front of anyone using a sharp
Tool
Carry a hand saw by the handle with the toe
Pointed downward
When using a screwdriver, avoid holding the material in the
Hand
After clamps have been applied to the work, it should not be
Moved
Face shields or goggles/glasses must be worn by shop students when there's a possibilty of
Loose Debris
Whenever possible, the ____ should be clamped
Project stock
All adjustments should be made before the machine is
Turned on
