Woodshop Safety Test Answers|Complete Questions
with Correct Answers
Safety instructions must be given before you are allowed to work on or operate any machine or
tool
You are not permitted to work on any equipment or machine if the ____________________ is not
present
instructor
Guards and safety devices must be on all machines during
operation
Machinery must not be oiled or adjusted while in
use
A machine must be started and stopped only by the
operator
Do not leave a machine while it is
running
When working on or near an machine or tool where there is a possibility of eye injury, you must wear
eye protection
You are not permitted within the safety zone around any machine unless you are the
operator
loose clothing must be tucked in before you start work, as a precaution against
getting entangled
If in doubt about any machine, check with the
instructor
Aisles and working areas must be kept clear of
all obstructions
The shop floor must be kept free of oil because of the danger of fire and
slipping
Combustible rags must be kept in a closed
, red container
Do not lift materials heavier than your ability to handle them
safely
Long pieces of material should be carried by
2 people
The attention of the instructor should be directed to any violation of
rules
Accidents, no matter how slight, must be reported immediately to
the instructor
carry sharp-pointed tools pointed
downward
do not leave tools and materials ____________ from a vise or a bench.
clamped
A dull tool is dangerous because it will
skip
Pass tools to classmates with the tool handles
toward them
Do not stand in front of anyone using a sharp
tool
Carry a hand saw by the handle with the toe
pointed downward
When using a screwdriver, avoid holding the material in the
hand
After clamps have been applied to the work, it should not be
moved
Face shields or googles/glasses must be worn by shop students when there is a possibility of
loose debris
Whenever possible, the _________ should be clamped
project stock
with Correct Answers
Safety instructions must be given before you are allowed to work on or operate any machine or
tool
You are not permitted to work on any equipment or machine if the ____________________ is not
present
instructor
Guards and safety devices must be on all machines during
operation
Machinery must not be oiled or adjusted while in
use
A machine must be started and stopped only by the
operator
Do not leave a machine while it is
running
When working on or near an machine or tool where there is a possibility of eye injury, you must wear
eye protection
You are not permitted within the safety zone around any machine unless you are the
operator
loose clothing must be tucked in before you start work, as a precaution against
getting entangled
If in doubt about any machine, check with the
instructor
Aisles and working areas must be kept clear of
all obstructions
The shop floor must be kept free of oil because of the danger of fire and
slipping
Combustible rags must be kept in a closed
, red container
Do not lift materials heavier than your ability to handle them
safely
Long pieces of material should be carried by
2 people
The attention of the instructor should be directed to any violation of
rules
Accidents, no matter how slight, must be reported immediately to
the instructor
carry sharp-pointed tools pointed
downward
do not leave tools and materials ____________ from a vise or a bench.
clamped
A dull tool is dangerous because it will
skip
Pass tools to classmates with the tool handles
toward them
Do not stand in front of anyone using a sharp
tool
Carry a hand saw by the handle with the toe
pointed downward
When using a screwdriver, avoid holding the material in the
hand
After clamps have been applied to the work, it should not be
moved
Face shields or googles/glasses must be worn by shop students when there is a possibility of
loose debris
Whenever possible, the _________ should be clamped
project stock
