Woodshop |Complete Questions with Correct
Answers Graded A+
When do you turn a machine on?
when you are ready, set up properly and focused on what needs to be completed, safely.
What adjustment should be made to the drill press when using larger bits?
Use a slower speed
When using most machines you should make sure that the wood is?
Clear of imperfections, nails etc. for easier use
When using a table saw you should always?
a. Keep you hands at least 4 inches away from the blade
b. Never remove the blade guard, unless approved by the attendant
c. Use a push stick, for safety, when less than 4 inches away from the
blade
How do you decide the speed of the spindle sander?
You don't you have to get special instructions on its use
How much weight should you apply to the belt sander while sanding?
Just enough weight to hold the wood in place, safely
what tool is used to cut slots for biscuit joining?
the biscuit joiner
When cutting tight curves on the band saw, you should?
Make relief cuts then remove the wood at a normal pace
Before making a cut on the table saw you should?
a. Check blade height is only 1/4 " above the cutting stock
b. Set the fence or push sled/tool
c. Make sure nobody is behind you
The planar is used to?
Plane the wood to the desired thickness
You should only plane off _______inches at a time on the planer?
1/16
Answers Graded A+
When do you turn a machine on?
when you are ready, set up properly and focused on what needs to be completed, safely.
What adjustment should be made to the drill press when using larger bits?
Use a slower speed
When using most machines you should make sure that the wood is?
Clear of imperfections, nails etc. for easier use
When using a table saw you should always?
a. Keep you hands at least 4 inches away from the blade
b. Never remove the blade guard, unless approved by the attendant
c. Use a push stick, for safety, when less than 4 inches away from the
blade
How do you decide the speed of the spindle sander?
You don't you have to get special instructions on its use
How much weight should you apply to the belt sander while sanding?
Just enough weight to hold the wood in place, safely
what tool is used to cut slots for biscuit joining?
the biscuit joiner
When cutting tight curves on the band saw, you should?
Make relief cuts then remove the wood at a normal pace
Before making a cut on the table saw you should?
a. Check blade height is only 1/4 " above the cutting stock
b. Set the fence or push sled/tool
c. Make sure nobody is behind you
The planar is used to?
Plane the wood to the desired thickness
You should only plane off _______inches at a time on the planer?
1/16
