FIREFIGHTER 2 ACTUAL FINAL EXAM 2024 250 QUESTIONS
AND STUDY GUIDE EXAM WITH DETAILED VERIFIED
ANSWERS (100% CORRECT) /A+ GRADE ASSURED
Which pneumatic tools are often used for delicate cutting operations and can cut case
hardened locks and steel? - (correct answer) Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? - (correct
answer) Premixing method
What is the term used to describe forward velocity pressure at a discharge opening
while water is flowing? - (correct answer) Flow pressure
Which of the following is NOT a question that would be asked concerning appliances
during a residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (correct answer) are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (correct
answer) Flow pressure
Proportioning methods: When would batch mixing not be effective? - (correct
answer) On large incidents because attack lines must be shut down when refilling an
empty tank.
Water applied to ordinary combustibles usually _______. - (correct answer) Reduce
flame spread
Which type of valves are used to control the flow from the hydrant? - (correct
answer) Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. -
(correct answer) Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____.
- (correct answer) Hose caps
Who should begin stabilization of a patient trapped inside a vehicle? - (correct
answer) A rescuer with EMT training
Name one element of patient removal: - (correct answer) Covering sharp edges
, Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. -
(correct answer) 165 | 76
Cribbing is most commonly used to _________. - (correct answer) stabilize objects
Which type of test should be preformed by private contractors or fire department
personnel? - (correct answer) Standard testing
Which proportioning method is used with portable extinguishers, wheeled,
extinguishers, skid-mounted twin-agent units, and vehicle mounted tank systems? -
(correct answer) Premixing method
One of the most important practices to address to building occupants about fire safety
is _______. - (correct answer) making sure to maintain clear and unobstructed exit
pathways
Normal pressure exiting a system before water is released from a hydrant is called
______. - (correct answer) Static presssure
Energy created by moving parts on machines, such as belts and bearings - (correct
answer) Mechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before
being distributed throughout the area served. - (correct answer) elevated
State 3 facts about service testing: - (correct answer) 1. The test area should be
smooth and free from rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - (correct answer) completed product after air is
introduced into the foam solution
What can hide fire hazards and impede paths of egress? - (correct answer) poor
housekeeping
With the bank-down foam application method, the foam stream is directed: -
(correct answer) onto an object, allowing the foam to run down / onto the surface of
the fuel.
Winches should be positioned: - (correct answer) as close to the object being
pulled as possible
AND STUDY GUIDE EXAM WITH DETAILED VERIFIED
ANSWERS (100% CORRECT) /A+ GRADE ASSURED
Which pneumatic tools are often used for delicate cutting operations and can cut case
hardened locks and steel? - (correct answer) Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? - (correct
answer) Premixing method
What is the term used to describe forward velocity pressure at a discharge opening
while water is flowing? - (correct answer) Flow pressure
Which of the following is NOT a question that would be asked concerning appliances
during a residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (correct answer) are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (correct
answer) Flow pressure
Proportioning methods: When would batch mixing not be effective? - (correct
answer) On large incidents because attack lines must be shut down when refilling an
empty tank.
Water applied to ordinary combustibles usually _______. - (correct answer) Reduce
flame spread
Which type of valves are used to control the flow from the hydrant? - (correct
answer) Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. -
(correct answer) Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____.
- (correct answer) Hose caps
Who should begin stabilization of a patient trapped inside a vehicle? - (correct
answer) A rescuer with EMT training
Name one element of patient removal: - (correct answer) Covering sharp edges
, Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. -
(correct answer) 165 | 76
Cribbing is most commonly used to _________. - (correct answer) stabilize objects
Which type of test should be preformed by private contractors or fire department
personnel? - (correct answer) Standard testing
Which proportioning method is used with portable extinguishers, wheeled,
extinguishers, skid-mounted twin-agent units, and vehicle mounted tank systems? -
(correct answer) Premixing method
One of the most important practices to address to building occupants about fire safety
is _______. - (correct answer) making sure to maintain clear and unobstructed exit
pathways
Normal pressure exiting a system before water is released from a hydrant is called
______. - (correct answer) Static presssure
Energy created by moving parts on machines, such as belts and bearings - (correct
answer) Mechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before
being distributed throughout the area served. - (correct answer) elevated
State 3 facts about service testing: - (correct answer) 1. The test area should be
smooth and free from rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - (correct answer) completed product after air is
introduced into the foam solution
What can hide fire hazards and impede paths of egress? - (correct answer) poor
housekeeping
With the bank-down foam application method, the foam stream is directed: -
(correct answer) onto an object, allowing the foam to run down / onto the surface of
the fuel.
Winches should be positioned: - (correct answer) as close to the object being
pulled as possible
