U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
1. One of the significant causes of leaks in underground liquid
storage systems is
- CORRECT ANSWER Improper Installation
2. Written Plans are required to - CORRECT ANSWER
obtain permits, solicit bids, and provide precise guidance for
installers.
3. The plans should - CORRECT ANSWER Describe the
property, identify the size and location of the tanks, indicate the
liquids to be stored and provide the location of the dispensers
and piping.
4. Storage systems discussed in this recommended
practice are usually regulated by - CORRECT ANSWER
Federal, state or local agencies.
5. All
owners should ensure that the equipment to be installed
meets - CORRECT ANSWER applicable regulatory
requirements before being installed
6. Consultthe local authorities who have jurisdiction in the area
before storage-system plans are
- CORRECT ANSWER finalized or construction is initiated.
7. All
owners should ensure that the equipment to be installed
meets all applicable regulatory requirements before -
CORRECT ANSWER Being installed.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
8. To
avoid damage tanks must not be - CORRECT ANSWER
dropped, dragged, or handled with sharp objects.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
9. Tanks must not be dropped, dragged, or handled with sharp
objects to avoid - CORRECT ANSWER Damage to the tank
10. The
only time tanks really should be moved is when -
CORRECT ANSWER for inspections and testing.
11. If
a tanks is damaged at all throughout the moving
process it must be - CORRECT ANSWER Repaired in
accordance with the manufacture's instructions.
12. The
proper way to move a tank is by lifting it, using the -
CORRECT ANSWER Lift lugs that are installed by the
manufacturer.
13. Tanks
should be carefully lifted and lowered using -
CORRECT ANSWER Cables or chains of adequate length.
14. When two lifting lugs are being used, the angle between the
lifting cable and vertical should be no more than - CORRECT
ANSWER 30 degrees.
15. Stockpilepiping materials and equipment in a on the
job site - CORRECT ANSWER Secure area
16. Confirm adherence to specifications by reporting to the
owner about any - CORRECT ANSWER detected damage
that could result in leakage or premature corrosion.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
17. Pressure test single-walled tanks with to psig air
pressure, soaping all surfaces, seams and fittings while
inspecting for bubbles. - CORRECT ANSWER 3 to 5
18. Air
testing with over psig (3 Psig for 12-Ft. Diameter FRP
tanks) is hazardous and may damage the tank - CORRECT
ANSWER 5 psig
19. Do
not air test a tank that has previously contained -
CORRECT ANSWER flammable or combustible liquids
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
1. One of the significant causes of leaks in underground liquid
storage systems is
- CORRECT ANSWER Improper Installation
2. Written Plans are required to - CORRECT ANSWER
obtain permits, solicit bids, and provide precise guidance for
installers.
3. The plans should - CORRECT ANSWER Describe the
property, identify the size and location of the tanks, indicate the
liquids to be stored and provide the location of the dispensers
and piping.
4. Storage systems discussed in this recommended
practice are usually regulated by - CORRECT ANSWER
Federal, state or local agencies.
5. All
owners should ensure that the equipment to be installed
meets - CORRECT ANSWER applicable regulatory
requirements before being installed
6. Consultthe local authorities who have jurisdiction in the area
before storage-system plans are
- CORRECT ANSWER finalized or construction is initiated.
7. All
owners should ensure that the equipment to be installed
meets all applicable regulatory requirements before -
CORRECT ANSWER Being installed.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
8. To
avoid damage tanks must not be - CORRECT ANSWER
dropped, dragged, or handled with sharp objects.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
9. Tanks must not be dropped, dragged, or handled with sharp
objects to avoid - CORRECT ANSWER Damage to the tank
10. The
only time tanks really should be moved is when -
CORRECT ANSWER for inspections and testing.
11. If
a tanks is damaged at all throughout the moving
process it must be - CORRECT ANSWER Repaired in
accordance with the manufacture's instructions.
12. The
proper way to move a tank is by lifting it, using the -
CORRECT ANSWER Lift lugs that are installed by the
manufacturer.
13. Tanks
should be carefully lifted and lowered using -
CORRECT ANSWER Cables or chains of adequate length.
14. When two lifting lugs are being used, the angle between the
lifting cable and vertical should be no more than - CORRECT
ANSWER 30 degrees.
15. Stockpilepiping materials and equipment in a on the
job site - CORRECT ANSWER Secure area
16. Confirm adherence to specifications by reporting to the
owner about any - CORRECT ANSWER detected damage
that could result in leakage or premature corrosion.
, U1 UST INSTALLATION/RETROFITTING
PRACTICE EXAM 2024 200 QUESTIONS WITH
DETAILED ANSWERS | GRADED A | LATEST
UPDATE
17. Pressure test single-walled tanks with to psig air
pressure, soaping all surfaces, seams and fittings while
inspecting for bubbles. - CORRECT ANSWER 3 to 5
18. Air
testing with over psig (3 Psig for 12-Ft. Diameter FRP
tanks) is hazardous and may damage the tank - CORRECT
ANSWER 5 psig
19. Do
not air test a tank that has previously contained -
CORRECT ANSWER flammable or combustible liquids
