Second Class Boiler Licenses Minnesota Questions With 100% Correct Answers.

Second Class Boiler Licenses Minnesota Questions With 100% Correct Answers. Certificate of inspection means a sticker attached to the boiler or pressure vessel which documents the month and year of the inspection and the employer of the inspector performing the inspection. Certificate of registration means a document that has been made available on the department's Web site that lists all registered boilers and pressure vessels at a location, including the last inspection date, the certificate expiration date, and the maximum allowable working pressure for each boiler or pressure vessel. High-pressure boiler means a boiler operating at a steam or other vapor pressure in excess of 15 psig, or a water or other liquid boiler in which the pressure exceeds 160 psig or the temperature exceeds 250 degrees Fahrenheit. Inspection due date means the last possible date that the inspection can be completed within the time limits in this chapter Insurance company boiler inspector means a national board-commissioned inspector who holds a current certificate of competency issued by the state. Low-pressure boiler means a boiler operating at a steam or other vapor pressure of 15 psig or less, or a water or other liquid boiler in which the pressure does not exceed 160 psig and the temperature does not exceed 250 degrees Fahrenheit. National board means the National Board of Boiler and Pressure Vessel Inspectors, which is an organization comprised of chief Inspectors for the states, cities, and territories of the United States and provinces and territories of Canada National Board Inspection Code; NBIC means a three-part technical document that is written and published by the national board detailing the installation, inspection, and repair of boilers and pressure vessels. Operation means the on-site act of manipulating, monitoring, and testing of boilers and their appurtenances by a properly licensed engineer or an apprentice under the direct supervision of the properly licensed engineer. Psig pounds per square inch gauge Remote monitoring means the act of viewing or overseeing the boiler or boiler plant operating parameters and conditions from a remote location. Repair. means the work necessary to restore a boiler or pressure vessel to a safe and satisfactory operating condition, as defined in National Board Inspection Code, part 3, section 9.