Category 3 Non-Cab Operated Crane Safety Questions With Answers Updated 2024/2025 (100% Verified Answers)

A floating crane with a capacity of 200,000lbs. is a crane.: Category 1 2. What is the category of a jib crane with a capacity of less than 20,000 pounds?: Category 3 3. An OET, Bridge crane with a capacity of 80,000lbs. is a crane.: Category 2 4. A commercial truck mounted crane with a capacity of 14,000 lbs. is a crane.: category 4 5. What types of power does a Category 1 or 4 crane generally use and what is its source?: Electric or hydraulic power supplied by a diesel engine 6. Load - parts are those that restrain position or control the movement of the load.: controling 7. A hook is what type of component?: Load-Bearing Part 8. Hydraulic foot brakes are what type or group of components?: Load-Controlling Parts 9. Load - parts are those that support the load.: bearing 10. How is electrical current conveyed from the revolving portion of the crane to the lower crane structure?: Through the collector ring system 11. Safety devices that provide protection for personnel and equipment are considered safety devices.: general Category 3 Non-Cab Operated Crane Safety Questions And Answers Updated 2024/2025 (100% Verified) 2 / 8 12. Safety devices that affect the safe load lifting and handling capabilities of equipment are considered safety devices.: operational 13. Which of the following does not affect the safe operation of the crane?: - General Safety Devices 14. A travel alarm is what type or group of components?: 15. A travel alarm is what type or group of components?: General Safety Device 16. During the walk around check you notice a loose bolt on the crane. You should:: Notify your supervisor of the deficiency. 17. The crane Pre-use Check consists of:: A walk around visual check Performing a "No load" operational 18. It is the operator's responsibility to report a deficiency to the Crane Department.: false 3 / 8 19. Deficiencies are required to be reported by the end of the shift.: false 20. If the upper limit switch is working correctly, there is no need to check the lower limit switch.: fasle 21. Part of the no load operational check is to ensure the proper of all controls.: function 22. What is the most important reason to do a pre-use check?: To make sure the crane is safe to use. 23. Documented checks are required for which of the following Category 3 cranes?: gantry