Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Used mainly for woodworking, this is a fixed, 90-degree angle. - answertry square This is an L-shaped, hexagonal steel bar. - answerhex key wrench This has a flat face for striking and a rounded face for peening (rounding off) metal and rivets. - answerball peen hammer This is usually 2 inches wide and 15 inches long. It has a nail slot at the end to pull nails out from tightly enclosed areas. - answerflat bar Shaped like an L, this is used to make sure wall studs and sole plates are at right angles to each other. - answercarpenter square This is a metal tool with a sharpened, beveled edge that is used to cut and shape wood, stone, or metal. - answerchisel This is used to drive nails and to pull nails out of wood. - answerclaw hammer This is used to cut on a slant at an angle that is not a right angle. - answerbevel This tool has a 12-inch blade that moves through a head that is marked with 45-degree and 90- degree angle measures. - answercombination square If you use a screwdriver incorrectly, you can damage the screwdriver or _________ the screw head. - answerstrip Use this tool to turn nuts, bolts, small pipe fittings, and chrome-plated pipe fittings. - answeradjustable end wrench To fasten or align two pieces or material, you can use this, which is a pin that fits into a corresponding hole. - answerdowel This is a device such as a nut or bolt used to attach one material to another. - answerfastener This is the unit of measure used to describe the torque needed to tighten a large object. - answerfoot pounds This is the unit of measure used to describe the torque needed to tighten a small object. - answerinch pounds