STATE FARM ESTIMATICS EXAM 2024 | ACCURATE
REAL EXAM QUESTIONS WITH STUDY GUIDE |
EXPERT VERFIED FOR GUARANTEEDPASS | LATEST
UPDATE
Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets
Birds Mouth
Spaced (open) sheathing is normally used with composition shingles.
TrueFalse
Composition shingles can be purchased in bundles which could be ⅓ square or ¼ square.
TrueFalse
True
Blanket insulation is an uncut roll of insulation cut to length at the job site. It is used in walls and
attics, and may or may not have a backing material.
TrueFalse
True
Select the false statement.
Select the single best answer:
A. Composition shingle weights range from 120 lb. to 480 lb. per square.
B. Composition shingles are made of fiberglass or asphalt saturated roofing material embedded
with mineral granules.
C. Wood roofing is generally divided into two categories, wood shingles and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true.
Composition shingle weights range from 120 lb. to 480 lb. per square.
Non-masonry siding products such as wood, aluminum, vinyl, steel, and vinyl clad siding are
usually measured by the square foot, but the materials are typically sold by the square (100 SF)
or by the piece.
TrueFalse
,True
Select the false statement.
Select the single best answer:
A. Vinyl clad siding is steel siding with a vinyl coating over it. It is more dent-resistant than
steel.
B. Vinyl siding is made of a rigid polyvinyl-chloride (PVC) compound. It is tough, durable, and
economical.
C. Aluminum siding has a baked-on enamel factory finished and can provide an appearance
closely resembling painted wood siding.
D. Vinyl clad siding is aluminum siding with a vinyl coating over it. It is more dent resistant than
aluminum and has less tendency to crack than vinyl.
E. Steel siding is more durable than vinyl, aluminum, or vinyl clad siding. Like aluminum siding,
it has a baked-on enamel factory finish.
Vinyl clad siding is steel siding with a vinyl coating over it. It is more den-resistant than steel.
How many trusses (16" o.c.) are in a 35' 6" long gable roof with no overhang on the gable ends?
Select the single best answer:
A. 28
B. 27
C. 26
D. 29
28
The formula for determining the area of a trapezoid is:
Select the single best answer:
A. [(Base1 + Base2) ÷ 2] x Height
B. ½ Base x Height
C. Base x Height
D. 𝜋𝜋𝑟𝑟 (pi r squared)
[(base1+base2) / 2] * height
The formula for determining the area of a triangle is:
Select the single best answer:
A. 𝜋𝜋𝑟𝑟 (pi r squared)
B. [(Base1 + Base2) ÷ 2] x Height
C. Base x Height
D. ½ Base x Height
D. ½ Base x Height
, The formula for determining the area of a circle is:
Select the single best answer:
A. ½ Base x height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
C. [(Base1 + Base2) ÷ 2] x Height
D. Base x Height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
"On-center" is a term to describe the distance from the center of one framing member to the
center of the next framing member, i.e., studs, joist, rafters.
TrueFalse
True
Select the False statement:
Select the single best answer:
A. Plywood, oriented strand board (OSB), fiberboard, and rigid insulating panels are widely used
for sheathing.
B. Wall sheathing reinforces the wall framing.
C. Sheathing adds rigidity, strength and some insulating qualities to the wall of a structure.
D. Sheathing provides a flat surface backing for other products, such as siding.
E. The thickness of the sheathing has no affect on the cost of the material.
b. Wall sheathing reinforces the wall framing.
According to the "Average Size Door Opening Guideline," a missing wall measuring 3'0" wide x
6'8" high would generally be subtracted from the quantity of drywall needed for that room.
TrueFalse
False
A room is 15' 3" long, 13' 5" wide with a ceiling height of 8', and the following openings:
Patio door 6'0" wide x 6'8" high
Entry door 2'6" wide x 6'8" high
Window 1 5'0" wide x 6'0" high
Window 2 3'0" wide x 6'0" high
How many square feet (SF) of drywall are on the walls and ceiling?
Select the single best answer:
A. 388.70 SF
B. 458.72 SF
REAL EXAM QUESTIONS WITH STUDY GUIDE |
EXPERT VERFIED FOR GUARANTEEDPASS | LATEST
UPDATE
Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets
Birds Mouth
Spaced (open) sheathing is normally used with composition shingles.
TrueFalse
Composition shingles can be purchased in bundles which could be ⅓ square or ¼ square.
TrueFalse
True
Blanket insulation is an uncut roll of insulation cut to length at the job site. It is used in walls and
attics, and may or may not have a backing material.
TrueFalse
True
Select the false statement.
Select the single best answer:
A. Composition shingle weights range from 120 lb. to 480 lb. per square.
B. Composition shingles are made of fiberglass or asphalt saturated roofing material embedded
with mineral granules.
C. Wood roofing is generally divided into two categories, wood shingles and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true.
Composition shingle weights range from 120 lb. to 480 lb. per square.
Non-masonry siding products such as wood, aluminum, vinyl, steel, and vinyl clad siding are
usually measured by the square foot, but the materials are typically sold by the square (100 SF)
or by the piece.
TrueFalse
,True
Select the false statement.
Select the single best answer:
A. Vinyl clad siding is steel siding with a vinyl coating over it. It is more dent-resistant than
steel.
B. Vinyl siding is made of a rigid polyvinyl-chloride (PVC) compound. It is tough, durable, and
economical.
C. Aluminum siding has a baked-on enamel factory finished and can provide an appearance
closely resembling painted wood siding.
D. Vinyl clad siding is aluminum siding with a vinyl coating over it. It is more dent resistant than
aluminum and has less tendency to crack than vinyl.
E. Steel siding is more durable than vinyl, aluminum, or vinyl clad siding. Like aluminum siding,
it has a baked-on enamel factory finish.
Vinyl clad siding is steel siding with a vinyl coating over it. It is more den-resistant than steel.
How many trusses (16" o.c.) are in a 35' 6" long gable roof with no overhang on the gable ends?
Select the single best answer:
A. 28
B. 27
C. 26
D. 29
28
The formula for determining the area of a trapezoid is:
Select the single best answer:
A. [(Base1 + Base2) ÷ 2] x Height
B. ½ Base x Height
C. Base x Height
D. 𝜋𝜋𝑟𝑟 (pi r squared)
[(base1+base2) / 2] * height
The formula for determining the area of a triangle is:
Select the single best answer:
A. 𝜋𝜋𝑟𝑟 (pi r squared)
B. [(Base1 + Base2) ÷ 2] x Height
C. Base x Height
D. ½ Base x Height
D. ½ Base x Height
, The formula for determining the area of a circle is:
Select the single best answer:
A. ½ Base x height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
C. [(Base1 + Base2) ÷ 2] x Height
D. Base x Height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
"On-center" is a term to describe the distance from the center of one framing member to the
center of the next framing member, i.e., studs, joist, rafters.
TrueFalse
True
Select the False statement:
Select the single best answer:
A. Plywood, oriented strand board (OSB), fiberboard, and rigid insulating panels are widely used
for sheathing.
B. Wall sheathing reinforces the wall framing.
C. Sheathing adds rigidity, strength and some insulating qualities to the wall of a structure.
D. Sheathing provides a flat surface backing for other products, such as siding.
E. The thickness of the sheathing has no affect on the cost of the material.
b. Wall sheathing reinforces the wall framing.
According to the "Average Size Door Opening Guideline," a missing wall measuring 3'0" wide x
6'8" high would generally be subtracted from the quantity of drywall needed for that room.
TrueFalse
False
A room is 15' 3" long, 13' 5" wide with a ceiling height of 8', and the following openings:
Patio door 6'0" wide x 6'8" high
Entry door 2'6" wide x 6'8" high
Window 1 5'0" wide x 6'0" high
Window 2 3'0" wide x 6'0" high
How many square feet (SF) of drywall are on the walls and ceiling?
Select the single best answer:
A. 388.70 SF
B. 458.72 SF
