Journeyman Oil Burner Exam/10
Questions and Correct Answers/
Latest Update
When a new burner is installed, what wiring must also be updated? - -
Breaker, properly rated wiring, properly installed and located
emergency switch, properly installed and located thermal electric
switch, properly installed and located service switch and properly
installed and located low water cut off
-How long is an emergency replacement chimney forum good for and
who's responsibility is it to see that it is replaced - -90 days and the
licensees
-What needs to be preformed before all new installations? - -Heat lost
system design and system load calculations
-A fill pipe should be how many feet from any building opening - -2'
-Who shall be consulted before welding a heat exchanger? - -The
Manufacturer
-A master or journeyman plumber shall not - -Pipe an oil tank, install
any electrical wiring unless licensed, install safety equipment, install
any portion of the venting system, install thermostats and relays
-A master or journeyman plumber shall - -Radiation, supply mains,
valves etc, connect supplies and returns to boilers, connect make-up
water to boiler, install back flo preventer, connect domestic water piping
to tank-less indirect or direct fire water heater
-A master or journeyman Oil Tech may do what electrical items? - -
Install, branch circuit, fittings, devices and raceways for powering oil,
solid fuel and propane or natural gas systems as well as motors or
controls.
-A master or journeyman oil tech may not do what electrical item? - -
Install a kickspace heater
---
-
Questions and Correct Answers/
Latest Update
When a new burner is installed, what wiring must also be updated? - -
Breaker, properly rated wiring, properly installed and located
emergency switch, properly installed and located thermal electric
switch, properly installed and located service switch and properly
installed and located low water cut off
-How long is an emergency replacement chimney forum good for and
who's responsibility is it to see that it is replaced - -90 days and the
licensees
-What needs to be preformed before all new installations? - -Heat lost
system design and system load calculations
-A fill pipe should be how many feet from any building opening - -2'
-Who shall be consulted before welding a heat exchanger? - -The
Manufacturer
-A master or journeyman plumber shall not - -Pipe an oil tank, install
any electrical wiring unless licensed, install safety equipment, install
any portion of the venting system, install thermostats and relays
-A master or journeyman plumber shall - -Radiation, supply mains,
valves etc, connect supplies and returns to boilers, connect make-up
water to boiler, install back flo preventer, connect domestic water piping
to tank-less indirect or direct fire water heater
-A master or journeyman Oil Tech may do what electrical items? - -
Install, branch circuit, fittings, devices and raceways for powering oil,
solid fuel and propane or natural gas systems as well as motors or
controls.
-A master or journeyman oil tech may not do what electrical item? - -
Install a kickspace heater
---
-
