ADVANCED RIGGING TEST 2 | LATEST EXAM| QUESTIONS WITH VERIFIED & COMPLETE SOLUTIONS 2024

ADVANCED RIGGING TEST 2 | LATEST EXAM| QUESTIONS WITH VERIFIED & COMPLETE SOLUTIONS 2024 What is meant by the term "two blocking"? a. Placing blocks under the outrigger beams. b. The load block contacts the boom point sheaves. c. Stacking loads on top of one another. d. The load strikes the boom while swinging. Correct Answer: b. The load block contacts the boom point sheaves. Lifting 20,000 lbs with a 2-leg bridle sling at a 30° horizontal sling angle, what is the force applied to each leg? a. 10,000 pounds b. 20,000 pounds c. 30,000 pounds d. 40,000 pounds Correct Answer: b. 20,000 pounds In multiple crane lifts using an equalizer beam, the weight of the beam should be considered: a. Part of the crane boom b. Part of the load weight c. Part of the crane weight d. A non-factor Correct Answer: b. Part of the load weight What is required if there is a deviation from the lift plan? a. The supervisor's permission b. The rigger's permission c. A new lift plan d. Mark ups on the existing lift plan Correct Answer: c. A new lift plan On level ground using skids and rollers, what percent of the weight of the load should yield the required line pull as a general rule of thumb? a. 2% b. 5% c. 10% d. 20% Correct Answer: b. 5% All of the following are results of unbalanced reeving of the hook block EXCEPT: a. Wear on the sheaves