ACI Concrete Field Testing Technician Test Exam latest 2024 Q&A

ACI Concrete Field Testing Technician Test Exam latest 2024 Q&A The total time allowed between obtaining the first and final portions of a composite sample is - CORRECT ANSWER-15 minutes When it is necessary to wet sieve the concrete sample, wet sieving should be performed after the individual samples are remixed into a composite sample (T or F) - CORRECT ANSWER-F Tests for slump, temperature, and air content must begin within ______ minutes after obtaining the composite sample - CORRECT ANSWER-5 minutes Begin molding test specimens within ______ minutes after obtaining the composite sample - CORRECT ANSWER-15 minutes The concrete samples should be protected from - CORRECT ANSWER-the sun, wind, and other sources of rapid evaporation, from contamination When test specimens are to be molded, the minimum size of sample obtained is - CORRECT ANSWER-28 L (1 ft^3) The primary objective of the sampling process is to obtain a representative sample (T or F) - CORRECT ANSWER-T When sampling from a revolving drum truck mixer collect concrete from ______ portions of the batch - CORRECT ANSWER-2 or more Wet sieving is performed - CORRECT ANSWER-when the concrete contains aggregates larger than appropriate for a test When sampling from a paving mixer it is not acceptable to place 3 small containers on the sub grade in order to obtain the required samples of concrete (T or F) - CORRECT ANSWER-F TEMPERATURE - CORRECT ANSWERit may require up to ___ min before the temp stabilizes when the NMS of the coarse agg is greater than ___ - CORRECT ANSWER-20min., 3in