Correct Answers Verified | Updated
2024/2025
Inside Caliper
This is used to measure internal distance between two points.
Outside Caliper
The calipers are adjusted to the outside diameter of the
object and then laid on a rule where the reading is
taken.
Odd-leg caliper
This is used to scribe a line a set distance / parallel to the edge of a metal or plastic work piece.
Dividers
This is used to scribe arcs or circles on a metal or plastic work piece.
Engineer's rule
Used to measure with a datum of zero on one edge.
Engineers square
Used to mark 90° angles on metal or plastic.
centre punch
Used on metals and some plastics to make a 'dot' for locating a drill or compass/dividers on metals.
Scriber
Used to mark lines on metal or plastics.
Try square
Woodworking tool used to mark a line at 90 degrees to the edge of the wood or finding "square".
Marking Gauge
This tool is used to mark a line (using the point) parallel to the edge of a piece of wood. It is mainly
used when marking out wood work joints.
Mortise Gauge
Has two spurs and will mark two parallel lines for marking out mortise and tenon
Coping saw
type of handsaw that's used to cut curved lines or shapes
Tenon saw