Hand tools Exam Questions with 100%
Correct Answers Verified | Updated
2024/2025
Adjustable end wrench
A smooth-jawed adjustable wrench used for turning nuts, bolts, and pipe fittings. Often referred to as
a Crescent® wrench.
Ball peen hammer
A hammer with a flat face that is used to strike cold chisels and punches. The rounded end—the peen
—is used to bend and shape soft metal.
Bell-faced hammer
A claw hammer with a slightly rounded, or convex, face.
Bevel
To cut on a slant at an angle that is not a right angle (90 degrees). The angle or inclination of a line or
surface that meets another at any angle but 90 degrees.
Box-end wrench
A wrench, usually double-ended, that has a closed socket that fits over the head of a bolt.
Carpenter's square
A flat, steel square commonly used in carpentry.
Cat's paw
A straight steel rod with a curved claw at one end that is used to pull nails that have been driven flush
with the surface of the wood or slightly below it.
Chisel
A metal tool with a sharpened, beveled edge used to cut and shape wood, stone, or metal.
Chisel bar
A tool with a claw at each end, commonly used to pull nails.
Claw hammer
A hammer with a flat striking face. The other end of the head is curved and divided into two claws to
remove nails.
Combination square
An adjustable carpenter's tool consisting of a steel rule that slides through an adjustable head.
Combination wrench
A wrench with an open end and a closed end.
Correct Answers Verified | Updated
2024/2025
Adjustable end wrench
A smooth-jawed adjustable wrench used for turning nuts, bolts, and pipe fittings. Often referred to as
a Crescent® wrench.
Ball peen hammer
A hammer with a flat face that is used to strike cold chisels and punches. The rounded end—the peen
—is used to bend and shape soft metal.
Bell-faced hammer
A claw hammer with a slightly rounded, or convex, face.
Bevel
To cut on a slant at an angle that is not a right angle (90 degrees). The angle or inclination of a line or
surface that meets another at any angle but 90 degrees.
Box-end wrench
A wrench, usually double-ended, that has a closed socket that fits over the head of a bolt.
Carpenter's square
A flat, steel square commonly used in carpentry.
Cat's paw
A straight steel rod with a curved claw at one end that is used to pull nails that have been driven flush
with the surface of the wood or slightly below it.
Chisel
A metal tool with a sharpened, beveled edge used to cut and shape wood, stone, or metal.
Chisel bar
A tool with a claw at each end, commonly used to pull nails.
Claw hammer
A hammer with a flat striking face. The other end of the head is curved and divided into two claws to
remove nails.
Combination square
An adjustable carpenter's tool consisting of a steel rule that slides through an adjustable head.
Combination wrench
A wrench with an open end and a closed end.
