Hand tools Exam Questions with 100%
Correct Answers Verified | Updated
2024/2025
The two basic measuring tools most often used by the carpenter are the ___ and the ___
flexible measuring tape and the folding wood tape rule
the measuring tool being used to mark a rafter is called a ___ or a ___
quick square or a speed square
Name three basic types of handsaws used by carpenters
A. Back Saw B. Crosscut Saw C. Dry Wall Saw
The tooth size of a handsaw is specified by listing the points per inch, how many teeth per inch will be
found on an 8 point saw
seven
the jack plane is commonly selected for general purpose work, the bed of this plane is ___ long
14 inches
A small hand plane often used by the carpenter has a blade mounted at a low angle with the bevel of
the cutter turned upward. The name of this plane is ___
Block Plane
A special device used to guide a large backsaw that is used to make fine, accurate cuts is called a ___
mirrored box
An auger bit with the number 6 stamped on the tang or shank will bore a hole ___ in diameter
3/8 inch
The hand tool used to turn auger bits, screwdriver bits and countersinks is called a __
Brace
A special type of boring bit that can be adjusted to produce holes of various sizes is called a ___ bit
expansive
A tool, normallly operated with one hand and commonly used by carpenters to form small holes is
called a ___
push drill
Two shapes of hammer heads commonly used by the carpenter are the curved claw and the ____
rip
Indentify the parts of the standard claw hammer
Correct Answers Verified | Updated
2024/2025
The two basic measuring tools most often used by the carpenter are the ___ and the ___
flexible measuring tape and the folding wood tape rule
the measuring tool being used to mark a rafter is called a ___ or a ___
quick square or a speed square
Name three basic types of handsaws used by carpenters
A. Back Saw B. Crosscut Saw C. Dry Wall Saw
The tooth size of a handsaw is specified by listing the points per inch, how many teeth per inch will be
found on an 8 point saw
seven
the jack plane is commonly selected for general purpose work, the bed of this plane is ___ long
14 inches
A small hand plane often used by the carpenter has a blade mounted at a low angle with the bevel of
the cutter turned upward. The name of this plane is ___
Block Plane
A special device used to guide a large backsaw that is used to make fine, accurate cuts is called a ___
mirrored box
An auger bit with the number 6 stamped on the tang or shank will bore a hole ___ in diameter
3/8 inch
The hand tool used to turn auger bits, screwdriver bits and countersinks is called a __
Brace
A special type of boring bit that can be adjusted to produce holes of various sizes is called a ___ bit
expansive
A tool, normallly operated with one hand and commonly used by carpenters to form small holes is
called a ___
push drill
Two shapes of hammer heads commonly used by the carpenter are the curved claw and the ____
rip
Indentify the parts of the standard claw hammer
