Hand tools Exam Questions with 100%
Correct Answers Verified | Updated
2024/2025
It is dangerous to use chisels that have ?
Mushroomed heads.
A cold chisels that has a mushroomed head can be reclaimed by?
Grinding to original shaft contour.
Why should file handles be on files?
They reduce the risk of injury.
A split hammer handle is best repaired by?
Removing and replacing it.
The safest way to use a wrench is to?
Pull on it with steady pressure.
What is the purpose of a wedge when replacing a hammer handle?
a wedge is used to tighten the end of the handle in the eye of the hammerhead.
A combination square consists of?
A square head , a protractor , A centre-head.
The most versatile type of square is the
Combination square
A thin rule has an advantage over thick rule when
Accuracy is a priority
A good tool for accurately transferring measurements is a
set of dividers
A flexible steel rule is an advantage when
measuring on curved surfaces
To check whether or not a surfaces is a true vertical, you would use a
torpedo level
What is the recommended length of a wraparound for marking a straight line around a pipe
twice the pipe circumference
, The size of pliers is determined by the
overall length of the tool
Vise grips have an advantage over pliers when
you need to maintain a constant pressure
C-clamps are sized according to the
distance the clamp opens
A bar clamp has an advantage when
clamping over great distances
A 32 teeth perinch hacksaw blade is the best choice for cutting
Thin stock
Clamping the work piece between two pieces of wood is an effective way to hacksaw
thin material
Files are classified by the
length, shape and cut
Serrated blade snips have an advantage over tinners' sinps when
cutting smaller more intricate patters
Tinners' snips are sized according the
overall length of the tool
The cutting edge of a cold chisel should be prepared to a ___________ degree angle for most
materials and up to ________ degrees for very hard materials
60 degree angle for most materials and up to 90 degrees for very hard materials
An advantage aluminium pipe wrench has over steel pipe wrench
Aluminium pipe wrench is lighter
Open-en, box-end and combinations wrenches are rated for size
They are sized according to the size of nut or bolt head for which they can be used
Explain how adjustable and pipe wrenches are rated for size
The overall length of the tool determines size
How are open-end wrenches sized
By measuring the distance across the flats
Correct Answers Verified | Updated
2024/2025
It is dangerous to use chisels that have ?
Mushroomed heads.
A cold chisels that has a mushroomed head can be reclaimed by?
Grinding to original shaft contour.
Why should file handles be on files?
They reduce the risk of injury.
A split hammer handle is best repaired by?
Removing and replacing it.
The safest way to use a wrench is to?
Pull on it with steady pressure.
What is the purpose of a wedge when replacing a hammer handle?
a wedge is used to tighten the end of the handle in the eye of the hammerhead.
A combination square consists of?
A square head , a protractor , A centre-head.
The most versatile type of square is the
Combination square
A thin rule has an advantage over thick rule when
Accuracy is a priority
A good tool for accurately transferring measurements is a
set of dividers
A flexible steel rule is an advantage when
measuring on curved surfaces
To check whether or not a surfaces is a true vertical, you would use a
torpedo level
What is the recommended length of a wraparound for marking a straight line around a pipe
twice the pipe circumference
, The size of pliers is determined by the
overall length of the tool
Vise grips have an advantage over pliers when
you need to maintain a constant pressure
C-clamps are sized according to the
distance the clamp opens
A bar clamp has an advantage when
clamping over great distances
A 32 teeth perinch hacksaw blade is the best choice for cutting
Thin stock
Clamping the work piece between two pieces of wood is an effective way to hacksaw
thin material
Files are classified by the
length, shape and cut
Serrated blade snips have an advantage over tinners' sinps when
cutting smaller more intricate patters
Tinners' snips are sized according the
overall length of the tool
The cutting edge of a cold chisel should be prepared to a ___________ degree angle for most
materials and up to ________ degrees for very hard materials
60 degree angle for most materials and up to 90 degrees for very hard materials
An advantage aluminium pipe wrench has over steel pipe wrench
Aluminium pipe wrench is lighter
Open-en, box-end and combinations wrenches are rated for size
They are sized according to the size of nut or bolt head for which they can be used
Explain how adjustable and pipe wrenches are rated for size
The overall length of the tool determines size
How are open-end wrenches sized
By measuring the distance across the flats
