Hand tools Exam Questions with 100%
Correct Answers Verified | Updated
2024/2025
A _______ has a steel head and a handle made of steel, wood, or fiberglass.
claw hammer
Another Name for a _ is a machinist's hammer.
ball peen
Ball-peen hammers are used in
-metalworking.
-It has a flat face for striking and a round face for peening (rounding off) metal or rivets.
A ___ is a heavy-duty tool used to drive posts or other large stakes.
_sledge hammer -
____ are demolition tools specifically used to remove nails.
nail pullers
Some come with chisel scrapers attached to used as a wedge between two materials.
nail pullers
___ are also called pinch, pry, or wrecking bars.
__ripping bars__
ripping bars_
-They can be 12" to 36" long.
-They are used as a wedge to tear down materials such as cabinets, wood framing, or concrete forms.
A _________ is a metal tool with a sharpened, beveled (sloped) edge.
chisel
Cold chisels are designed for cutting into
metal
The proper angle for the edge of a cold chisel to be ground is
______60 degrees_________.
machinest hammer
cold chisel
Cutting metal
, Ripping Bar
punches
-Indent metal before drilling a hole
-Drive pins and nails
-Align holes in two parts
_ are used for cutting and shaping wood.
wood chisle
______ are identified by the type of screw they drive.
screwdrivers
The most common screw heads are:
-phillips head
-slotted flat head
A screw with a square hole for a bit to fit into is called a _____ screw.
robertson
Phillips head screwdriver
_ are used for tightening and loosening nuts and bolts. There are many different types of wrenches
for many different tasks.
wrenches
The correct wrench...
_fits the hardware snug
_provides enough leverage for the task
_and cant be manipulated in the space provided
_ __ are used to tighten and loosen all types and sizes of threaded pipe.
pipe wrenches
_______ have smooth jaws. They are used on large nuts common to plumbing and piping.
spud wrenches
__ are very popular due to their versatility and speed.
sockets and ratcheting
___ are used to quickly run a nut onto a bolt that resists spinning it on with the fingers.
_speed handles
Correct Answers Verified | Updated
2024/2025
A _______ has a steel head and a handle made of steel, wood, or fiberglass.
claw hammer
Another Name for a _ is a machinist's hammer.
ball peen
Ball-peen hammers are used in
-metalworking.
-It has a flat face for striking and a round face for peening (rounding off) metal or rivets.
A ___ is a heavy-duty tool used to drive posts or other large stakes.
_sledge hammer -
____ are demolition tools specifically used to remove nails.
nail pullers
Some come with chisel scrapers attached to used as a wedge between two materials.
nail pullers
___ are also called pinch, pry, or wrecking bars.
__ripping bars__
ripping bars_
-They can be 12" to 36" long.
-They are used as a wedge to tear down materials such as cabinets, wood framing, or concrete forms.
A _________ is a metal tool with a sharpened, beveled (sloped) edge.
chisel
Cold chisels are designed for cutting into
metal
The proper angle for the edge of a cold chisel to be ground is
______60 degrees_________.
machinest hammer
cold chisel
Cutting metal
, Ripping Bar
punches
-Indent metal before drilling a hole
-Drive pins and nails
-Align holes in two parts
_ are used for cutting and shaping wood.
wood chisle
______ are identified by the type of screw they drive.
screwdrivers
The most common screw heads are:
-phillips head
-slotted flat head
A screw with a square hole for a bit to fit into is called a _____ screw.
robertson
Phillips head screwdriver
_ are used for tightening and loosening nuts and bolts. There are many different types of wrenches
for many different tasks.
wrenches
The correct wrench...
_fits the hardware snug
_provides enough leverage for the task
_and cant be manipulated in the space provided
_ __ are used to tighten and loosen all types and sizes of threaded pipe.
pipe wrenches
_______ have smooth jaws. They are used on large nuts common to plumbing and piping.
spud wrenches
__ are very popular due to their versatility and speed.
sockets and ratcheting
___ are used to quickly run a nut onto a bolt that resists spinning it on with the fingers.
_speed handles
