Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Inside Caliper This is used to measure internal distance between two points. Outside Caliper The calipers are adjusted to the outside diameter of the object and then laid on a rule where the reading is taken. Odd-leg caliper This is used to scribe a line a set distance / parallel to the edge of a metal or plastic work piece. Dividers This is used to scribe arcs or circles on a metal or plastic work piece. Engineer's rule Used to measure with a datum of zero on one edge. Engineers square Used to mark 90° angles on metal or plastic. centre punch Used on metals and some plastics to make a 'dot' for locating a drill or compass/dividers on metals. Scriber Used to mark lines on metal or plastics. Try square Woodworking tool used to mark a line at 90 degrees to the edge of the wood or finding "square". Marking Gauge This tool is used to mark a line (using the point) parallel to the edge of a piece of wood. It is mainly used when marking out wood work joints. Mortise Gauge Has two spurs and will mark two parallel lines for marking out mortise and tenon Coping saw type of handsaw that's used to cut curved lines or shapes Tenon saw Used to cut straight lines in wood