Internet of Things Journal

INDEX

Sr. Aim Date Teacher’s
No Sign

1 Preparing Raspberry Pi: Hardware preparation and Installation 05/01/23


2 Demonstrate Arduino Uno and its pins interfacing with IDE 05/01/23


3 11/01/23
GPIO: Light the LED with Python with/without a button using
either Uno/Raspberry Pi

4 SPI: Camera Connection and capturing Images/Videos using 19/01/23
SPI

5 26/01/23
GPIO: LED Grid Module: Program the 8X8 Grid with Different
Formulas.

6 02/02/23
Stepper Motor Control: PWM to manage stepper motor speed
using Uno/Raspberry Pi


7 Node RED: Connect LED to Internet of Things 09/02/23

8 Use different types of sensors (LDR, Temperature) with 16/02/23
Raspberry Pi/Uno

9 23/02/23
Trigger a set of led GPIO on any IoT platform via any related web
server

10 02/03/23
Interface with any sensor and send its value over the internet to
the server using any suitable protocol

, Subject: IoT Technologies


Practical 1
Aim: Preparing Raspberry Pi: Hardware preparation and Installation.


Steps:
1. Insert your sd card into the PC using a card reader.




2. Download the Raspberry Pi Imager software and Raspbian OS from
https://www.raspberrypi.com/software/ .




3. Set up and run the Raspberry Pi Imager.
4. Choose Raspbian (Lite or Full version) as the OS.

, Subject: IoT Technologies




5. Click on choose storage and select your sd card.




6. Click on Write, and Yes when you are prompted to erase the sd card.