Progression: Field Tech II - III Conventional Exam Questions And Answers (Verified And Updated)

Progression: Field Tech II - III Conventional Exam Questions And Answers (Verified And Updated) What is one reason why broadband cable operators install fiber-optic cable in stages instead of changing the infrastructure all at once? - answerChanging the infrastructure all at once would cause too many service disruptions. What is the difference between the fiber-to-the-node (FTTN) and fiber-to-the-curb (FTTC) topologies? - answerAn FTTC is allowed a smaller number of RF amplifiers between the optical fiber and the customer premises. Which of these components is used in a passive optical network (PON)? - answerOptical splitters. Which type of star topology used in a passive optical network (PON) places the PON splitters into fiber access terminal (FAT) located deep in the network and closer to the customer premises than the centralized split? - answerDistributed star. Which element of a passive optical network (PON) uses a Bragg grating filter? - answerOptical line terminal (OLT). Which element of a passive optical network (PON) uses patch panels? - answerOptical distribution network (ODN). What is it about radio frequency over glass (RFoG) that made broadband cable operators envision using it to make a seamless transition from the legacy hybrid fiber/coax (HFC) architecture over to a gigabit-capable passive optical network (GPON) or Ethernet passive optical network (EPON)? - answerRFoG can operate in parallel with GPON or EPON, which eliminates the need for any downtime during the transition. How are optical splitters used in the forward path? - answerIn the forward path, optical splitters are used as passive branching devices that divide an optical signal across multiple output fibers. Which of the following describes a fiber pigtail? - answerFiber-optic cable with pre- connectorized ends. Heat shrink tubing is installed over the fusion-splice to strengthen and protect it. When should the heat shrink be installed on the fiber? - answerBefore stripping the plastic coating from the fiber. Which of the following are statements of true axioms? - answerWhen A = C and B = C, then A = B because both are equal to C, which supports the axiom: Quantities equal to the same quantity are equal to each other. Simplify and solve the equation: If E = IR then I = ? - answerE/R The square of 7 = - answer49 The square root of 81 = - answer9 0.00004 = ______ x 10 to the power of ______. - answer4, -5 (75 x 10 to the power of 3) + (25 x 10 to the power of 4) = - answer32.5 x 10 to the power of 4 10 to the power of -3 has a metric prefix of ______. - answerMilli (480 x 10 to the power of -5) divided by (60 x 10 to the power of -3) = - answer8 x 10 to the power of -2 (250 x 10 to the power of -6) - (7 x 10 to the power of -5) = - answer180 x 10 to the power of -6 (75 × 103) + (25 × 104) = - answer(*Wrong) 100 × 10^3 (-25) + (42) + (-62) + (20) = - answer-25 (17) x (-19) = - answer-323 (-17) - (-34) = - answer17 -49/-7 = - answer7 (20) / (-4) + (-2) x (-10) - (-2) x (7) = - answer29 3 6/9 + 6 1/3 + 9 5/9 = - answer19 5/9 4/7 x 9 4/11 = - answer5 27/77 7 3/8 divided by 7 1/4 = - answer1 1/58 8.13 X 0.123 = - answer0.99999 0.5349 divided by 0.1420 = - answer3.7669014