, TABLE OF CONTENTS
i. FLOOR PLANS…………………………………………………………………. 3
a. GROUND FLOOR PLAN
b. SECOND FLOOR PLAN
c. THIRD FLOOR PLAN
d. FOURTH FLOOR PLAN
ii. ELEVATIONS………………………………………………………………….. 7
a. FRONT ELEVATION
b. REAR ELEVATION
iii. DIVISION 1: GENERAL REQUIREMENTS ………………………………….. 9
iv. DIVISION 2: SITE WORKS …………………………………………………… 11
v. DIVISION 3: CONCRETE ……………………………………………………... 12
vi. DIVISION 4: MASONRY ……………………………………………………… 13
vii. DIVISION 5: METALS…………………………………………………………. 15
viii. DIVISION 6: WOOD AND PLASTICS………………………………………… 16
ix. DIVISION 7: THERMAL AND MOISTURE PROTECTION ………………… 17
, x. DIVISION 8: DOORS AND WINDOWS ……………………………………… 17
xi. DIVISION 9: FINISHES………………………………………………………… 19
xii. DIVISION 10: SPECIALTIES…………………………………………………... 21
xiii. DIVISION 11 : EQUIPMENT…………………………………………………… 22
xiv. DIVISION 12: FURNISHINGS…………………………………………………… 23
xv. DIVISION 13 : SPECIAL CONSTRUCTION………………………………… 23
xvi. DIVISION 15: MECHANICAL………………………………………………… 23
xvii. DIVISION 16: ELECTRICAL …………………………………………………. 25
xviii. APPENDIX…………………………………………………………………. 30
PROJECT: Proposed 4-storey Mixed Use Commercial Building with Roof Deck
S P E C I F I C A T IO N S
These specifications will control the methods of construction and types of materials to be used
for the project that is planned and depicted in the precise drawings and plans that go with it.
Everything that is discussed or illustrated in one but not in the other will be seen as present in
both the plans, detailed drawings, and specifications because they are complementary to one
another. The designing architect should be consulted for clarification in circumstances that there
is a discrepancy between the two.
DIVISION 1: GENERAL CONDITIONS/REQUIREMENTS
Under this section this paper shall be known as the standard specifications for and shall be the
basis of interpretation of the plan for the proposed 4-STOREY MIXED USE COMMERCIAL
BUILDING WITH ROOF DECK.
To the fullest extent possible and in accordance with the plans and specifications, all building
components must be completed with first-rate craftsmanship, much to the satisfaction of the
i. FLOOR PLANS…………………………………………………………………. 3
a. GROUND FLOOR PLAN
b. SECOND FLOOR PLAN
c. THIRD FLOOR PLAN
d. FOURTH FLOOR PLAN
ii. ELEVATIONS………………………………………………………………….. 7
a. FRONT ELEVATION
b. REAR ELEVATION
iii. DIVISION 1: GENERAL REQUIREMENTS ………………………………….. 9
iv. DIVISION 2: SITE WORKS …………………………………………………… 11
v. DIVISION 3: CONCRETE ……………………………………………………... 12
vi. DIVISION 4: MASONRY ……………………………………………………… 13
vii. DIVISION 5: METALS…………………………………………………………. 15
viii. DIVISION 6: WOOD AND PLASTICS………………………………………… 16
ix. DIVISION 7: THERMAL AND MOISTURE PROTECTION ………………… 17
, x. DIVISION 8: DOORS AND WINDOWS ……………………………………… 17
xi. DIVISION 9: FINISHES………………………………………………………… 19
xii. DIVISION 10: SPECIALTIES…………………………………………………... 21
xiii. DIVISION 11 : EQUIPMENT…………………………………………………… 22
xiv. DIVISION 12: FURNISHINGS…………………………………………………… 23
xv. DIVISION 13 : SPECIAL CONSTRUCTION………………………………… 23
xvi. DIVISION 15: MECHANICAL………………………………………………… 23
xvii. DIVISION 16: ELECTRICAL …………………………………………………. 25
xviii. APPENDIX…………………………………………………………………. 30
PROJECT: Proposed 4-storey Mixed Use Commercial Building with Roof Deck
S P E C I F I C A T IO N S
These specifications will control the methods of construction and types of materials to be used
for the project that is planned and depicted in the precise drawings and plans that go with it.
Everything that is discussed or illustrated in one but not in the other will be seen as present in
both the plans, detailed drawings, and specifications because they are complementary to one
another. The designing architect should be consulted for clarification in circumstances that there
is a discrepancy between the two.
DIVISION 1: GENERAL CONDITIONS/REQUIREMENTS
Under this section this paper shall be known as the standard specifications for and shall be the
basis of interpretation of the plan for the proposed 4-STOREY MIXED USE COMMERCIAL
BUILDING WITH ROOF DECK.
To the fullest extent possible and in accordance with the plans and specifications, all building
components must be completed with first-rate craftsmanship, much to the satisfaction of the
