MEASUREMENT VERIFICATION EXAM
QUESTIONS WITH CORRECT ANSWERS
{ GRADED A+}
What is an example of evidence? - ✔✔Writings, physical objects,
witness
Fabric measuring device frequency of inspection - ✔✔Annual
Wire and cordage measuring devices shall - ✔✔Be returned to 0 before
each measurement, not be operated in a manner that allows slippage or
inaccuracy, and kept clean and accurate (All of the above)
All 3-wire single-phase service loads that have 120-208 volt network
systems shall be metered by - ✔✔A 2-element meter
,Each meter installation that has a nominal voltage of more than 240
volts between phases shall be equipped with - ✔✔Test blocks
Anti-drain valves are found on - ✔✔Wet hose pressure
The minimum discharge rate for wholesale LPG shall not exceed -
✔✔20% of the marked maximum discharge rate
Except for electrical meters, maintenance tolerances shall apply to
measuring equipment - ✔✔Being returned to service after being
repaired or overhauled, being returned to service following initial
rejection (Both A&B)
When is a service agent not required to notify the sealer of an adjustment
to a device according the Business and Professions Code Section 12515
- ✔✔When the adjustment is only for the purpose of maintaining the
device in a zero balance condition
Maintenance tolerances shall not exceed - ✔✔Plus or minus 2% on a
full or light load
, Each meter shall clearly register the number of - ✔✔Kilowatt hours
LPG with digital display has to have a minimum delivery of no less than
_________ divisions - ✔✔100
Which meter disk has a magnetic bearing system - ✔✔Modern Meter
The front name plate or register of electric watt hour meter must have all
except - ✔✔Accuracy class
How long must the owner keep records of invoices and rate schedules
for utility meters - ✔✔12 months
How would you seal a device that had remote configuration capability
and access may be unlimited or controlled through a software switch -
✔✔Event logger
When testing devices why is it important to distinguish between
wholesale and retail devices - ✔✔Because they have different
specifications and tolerances
QUESTIONS WITH CORRECT ANSWERS
{ GRADED A+}
What is an example of evidence? - ✔✔Writings, physical objects,
witness
Fabric measuring device frequency of inspection - ✔✔Annual
Wire and cordage measuring devices shall - ✔✔Be returned to 0 before
each measurement, not be operated in a manner that allows slippage or
inaccuracy, and kept clean and accurate (All of the above)
All 3-wire single-phase service loads that have 120-208 volt network
systems shall be metered by - ✔✔A 2-element meter
,Each meter installation that has a nominal voltage of more than 240
volts between phases shall be equipped with - ✔✔Test blocks
Anti-drain valves are found on - ✔✔Wet hose pressure
The minimum discharge rate for wholesale LPG shall not exceed -
✔✔20% of the marked maximum discharge rate
Except for electrical meters, maintenance tolerances shall apply to
measuring equipment - ✔✔Being returned to service after being
repaired or overhauled, being returned to service following initial
rejection (Both A&B)
When is a service agent not required to notify the sealer of an adjustment
to a device according the Business and Professions Code Section 12515
- ✔✔When the adjustment is only for the purpose of maintaining the
device in a zero balance condition
Maintenance tolerances shall not exceed - ✔✔Plus or minus 2% on a
full or light load
, Each meter shall clearly register the number of - ✔✔Kilowatt hours
LPG with digital display has to have a minimum delivery of no less than
_________ divisions - ✔✔100
Which meter disk has a magnetic bearing system - ✔✔Modern Meter
The front name plate or register of electric watt hour meter must have all
except - ✔✔Accuracy class
How long must the owner keep records of invoices and rate schedules
for utility meters - ✔✔12 months
How would you seal a device that had remote configuration capability
and access may be unlimited or controlled through a software switch -
✔✔Event logger
When testing devices why is it important to distinguish between
wholesale and retail devices - ✔✔Because they have different
specifications and tolerances
