Cbspd exam questions WITH ANS 2024
An inventory system whereby a supplier provides a complete inventory, storage, and distribution service
for the facility and delivers to user departments on a pre- scheduled basis is known as correct
answerstockless supply system
The sequential compression unit would be used for which of the following conditions? correct answerto
limit the development of deep vein thrombosis and peripheral edema
Which of the following makes the decision whether to purchase, lease, or rent an equipment? correct
answerhospital administration
The packaging of choice for dry heat sterilization is correct answeraluminum foil
Which of the following microorganisms is used to biologically monitor the ozone sterilizer? correct
answergeobacillus stearothermophilus
Which of the following should NOT be processed in a low-temperature gas plasma sterilizer? correct
answergauze sponges
Which of the following packaging materials is NOT recommended for EO sterilization? correct
answernylon
The basic parameters of gas sterilization in a 100% EO sterilizer are concentration, exposure time and
correct answerhumidity and temperature
What is the minimum air exchanges to be maintained in an area where 100% EO cartridges or EO
mixture cylinders are stored? correct answer10 per hour
Sterilized packs are MOST likely to become contaminated correct answerwithin the first hour of
sterilization
, Routine BI testing for steam sterilizers should be performed AT LEAST correct answerweekly
If the biological test is performed daily, how often is it necessary to incubate a control biological
indicator? correct answeronce a day, and if a new lot number is used
Which of the following is the correct sterilizer setting for the Bowie Dick test? correct answer3.5 to 4
mins at 270 prevac
What should be done if the Bowie Dick test fails the FIRST time? correct answerrepeat the test one more
time
Bowie-Dick falls under what class of indicator? correct answerClass II chemical
A class 5 indicator is called a correct answerintegrating indicator
For sterilization, basin sets should be positioned correct answertilted on their side
Which action should be taken when a wet pack is noted while unloading the sterilizer? correct
answerreprocess the item
The absence of all forms of microbial life, including spores, is known as correct answersterility
The sterile storage area should be located correct answeradjacent to the sterilization area
What should action should be taken if a reusable sterile basin set is dropped on the floor? correct
answersend it to be reprocessed
Items that may be subjected to storage challenges should be correct answerplaced in a sterility
maintenance cover be
An inventory system whereby a supplier provides a complete inventory, storage, and distribution service
for the facility and delivers to user departments on a pre- scheduled basis is known as correct
answerstockless supply system
The sequential compression unit would be used for which of the following conditions? correct answerto
limit the development of deep vein thrombosis and peripheral edema
Which of the following makes the decision whether to purchase, lease, or rent an equipment? correct
answerhospital administration
The packaging of choice for dry heat sterilization is correct answeraluminum foil
Which of the following microorganisms is used to biologically monitor the ozone sterilizer? correct
answergeobacillus stearothermophilus
Which of the following should NOT be processed in a low-temperature gas plasma sterilizer? correct
answergauze sponges
Which of the following packaging materials is NOT recommended for EO sterilization? correct
answernylon
The basic parameters of gas sterilization in a 100% EO sterilizer are concentration, exposure time and
correct answerhumidity and temperature
What is the minimum air exchanges to be maintained in an area where 100% EO cartridges or EO
mixture cylinders are stored? correct answer10 per hour
Sterilized packs are MOST likely to become contaminated correct answerwithin the first hour of
sterilization
, Routine BI testing for steam sterilizers should be performed AT LEAST correct answerweekly
If the biological test is performed daily, how often is it necessary to incubate a control biological
indicator? correct answeronce a day, and if a new lot number is used
Which of the following is the correct sterilizer setting for the Bowie Dick test? correct answer3.5 to 4
mins at 270 prevac
What should be done if the Bowie Dick test fails the FIRST time? correct answerrepeat the test one more
time
Bowie-Dick falls under what class of indicator? correct answerClass II chemical
A class 5 indicator is called a correct answerintegrating indicator
For sterilization, basin sets should be positioned correct answertilted on their side
Which action should be taken when a wet pack is noted while unloading the sterilizer? correct
answerreprocess the item
The absence of all forms of microbial life, including spores, is known as correct answersterility
The sterile storage area should be located correct answeradjacent to the sterilization area
What should action should be taken if a reusable sterile basin set is dropped on the floor? correct
answersend it to be reprocessed
Items that may be subjected to storage challenges should be correct answerplaced in a sterility
maintenance cover be
