ASE MLR CERTIFICATION TEST
QUESTIONS WITH COMPLETE
ANSWERS { GRADED A+}
Both A and B - ✔✔Technician observes that the brake fluid level is at the "Min"
mark in the master cylinder reservoir. Tech A says that worn front pads could be
the cause. Tech B says that a leak in the brake hydraulic system could be the cause.
Who is right?
A only - ✔✔The tires of a vehicle are being rotated and balanced. Tech A says
that the wheel weight retaining clips must be matched to the rim profile. Tech B
says that directional tires are rotated in a criss-cross pattern. Who is right?
Safely exit the building - ✔✔When a shop fire cannot be immediately contained,
the best thing to do is warn others in the area, and:
, 300 amps for 15 seconds - ✔✔A fully charged battery rated at 600 CCA, the
ambient temperature is 70 degrees which of these current and time periods should
be used?
B only - ✔✔A vehicle's halogen headlamp bulbs are being replaced. Technician A
says the glass part of the bulb can only be handled with bare hands. Technician B
says the headlamp may need to be removed. Who is right?
0.728 - ✔✔On a Metric Micrometer upper sleeve reading 5.0mm with lower
sleeve reading 0.50mm and a thimble reading of 0.01mm what is the overall
reading?
A only - ✔✔The fuel filter on a fuel-injected vehicle is being replaced. Tech A
says the fuel pressure should be relieved before removing the filter. Tech B says
that the arrow on the fuel filter should point towards the fuel tank. Who is right?
The brake pedal feels low and spongy - ✔✔Which of these is an indication of air
in the brake hydraulic system?
Anaerobic - ✔✔Which of these cures in the absence of air?
Fluid contaminated brake linings - ✔✔A grabbing brake condition can be caused
by any of these EXCEPT:
QUESTIONS WITH COMPLETE
ANSWERS { GRADED A+}
Both A and B - ✔✔Technician observes that the brake fluid level is at the "Min"
mark in the master cylinder reservoir. Tech A says that worn front pads could be
the cause. Tech B says that a leak in the brake hydraulic system could be the cause.
Who is right?
A only - ✔✔The tires of a vehicle are being rotated and balanced. Tech A says
that the wheel weight retaining clips must be matched to the rim profile. Tech B
says that directional tires are rotated in a criss-cross pattern. Who is right?
Safely exit the building - ✔✔When a shop fire cannot be immediately contained,
the best thing to do is warn others in the area, and:
, 300 amps for 15 seconds - ✔✔A fully charged battery rated at 600 CCA, the
ambient temperature is 70 degrees which of these current and time periods should
be used?
B only - ✔✔A vehicle's halogen headlamp bulbs are being replaced. Technician A
says the glass part of the bulb can only be handled with bare hands. Technician B
says the headlamp may need to be removed. Who is right?
0.728 - ✔✔On a Metric Micrometer upper sleeve reading 5.0mm with lower
sleeve reading 0.50mm and a thimble reading of 0.01mm what is the overall
reading?
A only - ✔✔The fuel filter on a fuel-injected vehicle is being replaced. Tech A
says the fuel pressure should be relieved before removing the filter. Tech B says
that the arrow on the fuel filter should point towards the fuel tank. Who is right?
The brake pedal feels low and spongy - ✔✔Which of these is an indication of air
in the brake hydraulic system?
Anaerobic - ✔✔Which of these cures in the absence of air?
Fluid contaminated brake linings - ✔✔A grabbing brake condition can be caused
by any of these EXCEPT:
