Auto Physical Damage Appraiser Prep –
PA | 100% Correct Answers | Verified |
Latest 2024 Version
What is not a part of the front end?
A. Grille
B. Hood
C. Fenders
D. Engine - ✔✔D. Engine
This part is primarily for style, but helps to protect the bumper and undercarriage from stones, and
deflects air to help improve fuel economy?
A. Bumper Guards
B. Nerf Strips
C. Valance Panel
D. Face Bar - ✔✔C. Valance Panel
Energy Absorbers absorb the energy of a collision through the compression of :
A. Rubber Springs
B. Shock Absorbers
C. Coil Springs
D. Hydraulic Fluid - ✔✔D. Hydraulic Fluid
Grilles, hoods & fenders are always sheet metal
,True or False - ✔✔False - Plastic, Steel aluminum
The lock striker or latch engages the lock when the hood is closed, this part is mounted to the:
A. Radiator Support
B. Condenser
C. Control Arm
D. Face Bar - ✔✔A. Radiator Support
The hood hinges are only available as part of the hood panel, they can not be ordered separately
True or False - ✔✔False
This uni-body component forms the housing for the front suspension
A. Inner Fender
B. Fender Skirt
C. Strut Tower
D. Hinge Pillar - ✔✔C. Strut Tower
The 3 components of the composite headlamp are, except
A. Lens
B. Bulbs
C. Retaining Ring
D. Headlamp Housing - ✔✔C. Retaining Ring
There are 5 components of the sealed beam, which is NOT part of this assembly
,A. Sealed Beam
B. Headlight Control Mount
C. Headlamp Bezel
D. Headlamp Capsule - ✔✔B. Headlight Control Mount
Parking lamps are intended to provide higher illumination than headlamps?
True or False - ✔✔False
Which of the following are NOT considered part of an auto's body? More than 1
A. Rear Body
B. Roof
C. Bumpers
D. Cowl
E. Pillars
F. Doors
G. Hood
H. Fender
I. Floor pan
J. Rocker Panels
K. Quarter Panel - ✔✔C. Bumpers
G. Hood
H. Fender
To contribute to strength of the auto body, many sheet metal panels are made of
A. Low Temperature Aluminum
, B. High Strength steel
C. Low Static Titanium
D. High Tempered Plastic - ✔✔B. High Strength steel
This Pillar attaches to the rear of either cowl side panel:
A. C Pillar
B. Hinge Pillar
C. Lock Pillar
D. B Pillar - ✔✔B. Hinge Pillar
These body parts provide support to the roof, except:
A. Hinge Pillar
B. Center Pillar
C. Lock Pillar
D. Firewall - ✔✔D. Firewall
A 2 door vehicle has a center pillar
True or False - ✔✔False
The upper portion of the quarter panel is sometimes referred to as the sail panel?
True or False - ✔✔True
The inner quarter panel is ______________ to the outer quarter panel, the floor pan and the
wheelhouse
PA | 100% Correct Answers | Verified |
Latest 2024 Version
What is not a part of the front end?
A. Grille
B. Hood
C. Fenders
D. Engine - ✔✔D. Engine
This part is primarily for style, but helps to protect the bumper and undercarriage from stones, and
deflects air to help improve fuel economy?
A. Bumper Guards
B. Nerf Strips
C. Valance Panel
D. Face Bar - ✔✔C. Valance Panel
Energy Absorbers absorb the energy of a collision through the compression of :
A. Rubber Springs
B. Shock Absorbers
C. Coil Springs
D. Hydraulic Fluid - ✔✔D. Hydraulic Fluid
Grilles, hoods & fenders are always sheet metal
,True or False - ✔✔False - Plastic, Steel aluminum
The lock striker or latch engages the lock when the hood is closed, this part is mounted to the:
A. Radiator Support
B. Condenser
C. Control Arm
D. Face Bar - ✔✔A. Radiator Support
The hood hinges are only available as part of the hood panel, they can not be ordered separately
True or False - ✔✔False
This uni-body component forms the housing for the front suspension
A. Inner Fender
B. Fender Skirt
C. Strut Tower
D. Hinge Pillar - ✔✔C. Strut Tower
The 3 components of the composite headlamp are, except
A. Lens
B. Bulbs
C. Retaining Ring
D. Headlamp Housing - ✔✔C. Retaining Ring
There are 5 components of the sealed beam, which is NOT part of this assembly
,A. Sealed Beam
B. Headlight Control Mount
C. Headlamp Bezel
D. Headlamp Capsule - ✔✔B. Headlight Control Mount
Parking lamps are intended to provide higher illumination than headlamps?
True or False - ✔✔False
Which of the following are NOT considered part of an auto's body? More than 1
A. Rear Body
B. Roof
C. Bumpers
D. Cowl
E. Pillars
F. Doors
G. Hood
H. Fender
I. Floor pan
J. Rocker Panels
K. Quarter Panel - ✔✔C. Bumpers
G. Hood
H. Fender
To contribute to strength of the auto body, many sheet metal panels are made of
A. Low Temperature Aluminum
, B. High Strength steel
C. Low Static Titanium
D. High Tempered Plastic - ✔✔B. High Strength steel
This Pillar attaches to the rear of either cowl side panel:
A. C Pillar
B. Hinge Pillar
C. Lock Pillar
D. B Pillar - ✔✔B. Hinge Pillar
These body parts provide support to the roof, except:
A. Hinge Pillar
B. Center Pillar
C. Lock Pillar
D. Firewall - ✔✔D. Firewall
A 2 door vehicle has a center pillar
True or False - ✔✔False
The upper portion of the quarter panel is sometimes referred to as the sail panel?
True or False - ✔✔True
The inner quarter panel is ______________ to the outer quarter panel, the floor pan and the
wheelhouse
