ASE MLR CERTIFICATION EXAM 2024 WITH 100% ACCURATE SOLUTIONS

Technician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? - ANSWER ☑☑Both A and B The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directional tires are rotated in a criss-cross pattern. Who is right? - ANSWER ☑☑A only When a shop fire cannot be immediately contained, the best thing to do is warn others in the area, and: - ANSWER ☑☑Safely exit the building A fully charged battery rated at 600 CCA, the ambient temperature is 70 degrees which of these current and time periods should be used? - ANSWER ☑☑300 amps for 15 seconds A vehicle's halogen headlamp bulbs are being replaced. Technician A says the glass part of the bulb can only be handled with bare hands. Technician B says the headlamp may need to be removed. Who is right? - ANSWER ☑☑B only On a Metric Micrometer upper sleeve reading 5.0mm with lower sleeve reading 0.50mm and a thimble reading of 0.01mm what is the overall reading? - ANSWER ☑☑0.728 The fuel filter on a fuel-injected vehicle is being replaced. Tech A says the fuel pressure should be relieved before removing the filter. Tech B says that the arrow on the fuel filter should point towards the fuel tank. Who is right? - ANSWER ☑☑A only Which of these is an indication of air in the brake hydraulic system? - ANSWER ☑☑The brake pedal feels low and spongy