OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
You should change your working position frequently by: - CORRECT ANSWER
All of the above
regardless of how good your working posture is, working in the same posture
or sitting for prolonged periods is not healthy. - CORRECT ANSWER True
Hazard prevention and control includes - CORRECT ANSWER Implementing
administrative and engineering controls
Pushing carries a greater risk of strain and injury. - CORRECT ANSWER False
Uncontrollable shivering, loss of coordination, and slurred speech are
symptoms of what? - CORRECT ANSWER Hypothermia
Types of heat illness include? - CORRECT ANSWER All of the above
Implementing an ergonomic process is effective in reducing the risk of
developing MSDs in high-risk industries. - CORRECT ANSWER True
When does Working Restriction Protection end? - CORRECT ANSWER The
employee is able to return to his or her regular job or a new position.
Reporting symptoms of MSD early does not help in stopping MSD. - CORRECT
ANSWER False
,OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
Industrial hygiene is the science of keeping yourself favorable to health, free from
dirt, bacteria. - CORRECT ANSWER False
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - CORRECT ANSWER True
Biological hazards are - CORRECT ANSWER Viruses
Which of the following is NOT a role of industrial hygienists? - CORRECT
ANSWER Training employees on the recognition of hazards
Noise can be reduced by: - CORRECT ANSWER All of the above
Engineering controls are the last strategy of control an employer should use for
job hazards. - CORRECT ANSWER False
Hand tools are powered instruments, which can be very hazardous when
improperly used due to their power source. - CORRECT ANSWER False
Which of the following is not a correct general precaution that should be followed
by all power tool users? - CORRECT ANSWER Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - CORRECT
ANSWER True
What is the main danger associated with pneumatic tools? - CORRECT
ANSWER Getting hit by tool's attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a
hazard to employees. - CORRECT ANSWER True
What requirements are necessary to protect an electric tool user from shock? -
CORRECT ANSWER Both A and B
,OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
All portable, power-driven circular saws having a blade diameter greater than
3 in. must be equipped with guards above and below the base plate or shoe -
CORRECT ANSWER False
An important safety precaution to remember when operating powder-actuated
tool is: - CORRECT ANSWER Inspect it before use and determine that it is
clean and that all moving parts operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm
with an internal temperature lift. - CORRECT ANSWER False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - CORRECT ANSWER Employers
What does MSD stand for? - CORRECT ANSWER musculoskeletal disorders
Effective personal protective equipment must be? - CORRECT ANSWER Regularly
maintained
Employees who wear personal protective equipment do not need safety and
health training. - CORRECT ANSWER False
During emergencies, hazards appear that normally are not found in the workplace. -
CORRECT ANSWER True
Work practice controls include the company's general workplace rules and
other operation- specific rules. - CORRECT ANSWER True
Which of the following is not a responsibility of a fire watch? - CORRECT
ANSWER Complete tasks not related to fire watch duty in the work areas
Must not be stored near highly combustible material. - CORRECT
, OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
ANSWER Oxygen Cylinders
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
You should change your working position frequently by: - CORRECT ANSWER
All of the above
regardless of how good your working posture is, working in the same posture
or sitting for prolonged periods is not healthy. - CORRECT ANSWER True
Hazard prevention and control includes - CORRECT ANSWER Implementing
administrative and engineering controls
Pushing carries a greater risk of strain and injury. - CORRECT ANSWER False
Uncontrollable shivering, loss of coordination, and slurred speech are
symptoms of what? - CORRECT ANSWER Hypothermia
Types of heat illness include? - CORRECT ANSWER All of the above
Implementing an ergonomic process is effective in reducing the risk of
developing MSDs in high-risk industries. - CORRECT ANSWER True
When does Working Restriction Protection end? - CORRECT ANSWER The
employee is able to return to his or her regular job or a new position.
Reporting symptoms of MSD early does not help in stopping MSD. - CORRECT
ANSWER False
,OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
Industrial hygiene is the science of keeping yourself favorable to health, free from
dirt, bacteria. - CORRECT ANSWER False
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - CORRECT ANSWER True
Biological hazards are - CORRECT ANSWER Viruses
Which of the following is NOT a role of industrial hygienists? - CORRECT
ANSWER Training employees on the recognition of hazards
Noise can be reduced by: - CORRECT ANSWER All of the above
Engineering controls are the last strategy of control an employer should use for
job hazards. - CORRECT ANSWER False
Hand tools are powered instruments, which can be very hazardous when
improperly used due to their power source. - CORRECT ANSWER False
Which of the following is not a correct general precaution that should be followed
by all power tool users? - CORRECT ANSWER Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - CORRECT
ANSWER True
What is the main danger associated with pneumatic tools? - CORRECT
ANSWER Getting hit by tool's attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a
hazard to employees. - CORRECT ANSWER True
What requirements are necessary to protect an electric tool user from shock? -
CORRECT ANSWER Both A and B
,OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
All portable, power-driven circular saws having a blade diameter greater than
3 in. must be equipped with guards above and below the base plate or shoe -
CORRECT ANSWER False
An important safety precaution to remember when operating powder-actuated
tool is: - CORRECT ANSWER Inspect it before use and determine that it is
clean and that all moving parts operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm
with an internal temperature lift. - CORRECT ANSWER False
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - CORRECT ANSWER Employers
What does MSD stand for? - CORRECT ANSWER musculoskeletal disorders
Effective personal protective equipment must be? - CORRECT ANSWER Regularly
maintained
Employees who wear personal protective equipment do not need safety and
health training. - CORRECT ANSWER False
During emergencies, hazards appear that normally are not found in the workplace. -
CORRECT ANSWER True
Work practice controls include the company's general workplace rules and
other operation- specific rules. - CORRECT ANSWER True
Which of the following is not a responsibility of a fire watch? - CORRECT
ANSWER Complete tasks not related to fire watch duty in the work areas
Must not be stored near highly combustible material. - CORRECT
, OSHA 30 FINAL EXAM 2024 2 VERSIONS OF THE
EXAM WITH 100 QUESTIONS AND DETAILED
ANSWERS EACH GRADED A+
ANSWER Oxygen Cylinders
