API 1169 (API 1169 terms and study
questions)
Which of the following equipment may NOT be required for a pressure test?
internal line clamps
before testing begins, a ________ with explanatory notes and data should be prepared
pressure test procedure
the pressure testing of newly constructed liquid pipelines and replaced segments of existing
pipelinesshould be performed in accordance with
ASME B31.4, 49 Code of Federal Regulations, Part 195 and any other applicable governmental
regulations.
Before the actual line filling operation, it is advisable to run a _________ in an effort to identify any
geometric abnormalities that may exist in the line prior to the test
Sizing pig, caliper or deformation tool
Personnel conducting a pressure test should keep:
Complete record of the test, including details of the test operation and events such as weather
variations, test failures, bleedoffs, repressurizations, and so forth
According to API 1169 an INSPECTOR is an individual qualified to monitor, assess, evaluate, verify,
discuss, decide, resolve, report, and document pipeline construction activities to ensure the
requirements of the design, drawings, specifications, regulations, and industry practices are being met
safely, efficiently, and in an environmentally sound manner.
true
Quality Assurance includes those activities focused on providing confidence that quality requirements
are consistently fulfilled
true
Inspectors are NOT empowered and expected to shut down any work on the basis of, but not limited
to
situations or activities that have occurred, are occurring, or may occur that could result in:
work schedule of the contractor
Inspection Personnel are expected to interact with representatives of newspapers, TV, or other media
seeking information
false
Inspectors should evaluate the following areas to avoid incidents and raise awareness of hazards,
except:
Traffic Congestion - at the local Walmart when a sale is in progress
According to API, Q1, Specification for Quality Programs, calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
, true
According to API, Q1, Specification for Quality Programs, calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
management
Regarding training and awareness, the organization shall:
Provide for quality management system training and job training;
Maintain appropriate records of education, training, skills, and experience;
The quality management system documentation shall include the following, except for:
All federally required processes regarding the project at hand
Regarding design and development review, at suitable stages, review(s) shall be performed:
To evaluate the suitability, adequacy, and effectiveness of the results of design and development
stages to meet specified requirements;
To identify any problems and propose necessary actions;
The Contingency Plan shall include the following, at a minimum:
Actions required in response to significant risk scenarios to mitigate effects of disruptive incidents;
Identification and assignment of responsibilities and authorities;
Internal and external communication controls
Where arc welding is regularly carried out, adjacent walls and other surfaces shall have:
Low reflectivity to ultraviolet radiation
When using cleaning compounds prior to welding, __________ instructions shall be followed
manufacturers
Fire watchers shall be posted where welding or cutting is done and where a large fire might develop,
or
whenever any of the following conditions exist:
Proximity of Combustibles - Combustible materials in building construction or contents are closer
that a radius of 35 feet to the point of operation.
Openings - There are wall or floor openings within a radius of 35 feet which expose combustible
material in adjacent areas, including concealed spaces in walls, ceilings or floors.
Metal Walls and Pipes - Combustible materials adjacent to the opposite side of metal partitions,
walls, ceiling, or roofs, or in contact with pipes, and are likely to be ignited by conduction or radiation.
Cylinders of liquefied gases shall not be charged to more than _______ the maximum capacity by
weight
or pressure.
1/2
Unconnected cylinders shall be stored in an approved storage area, preferably indoors, but not near a
building entrance
false
questions)
Which of the following equipment may NOT be required for a pressure test?
internal line clamps
before testing begins, a ________ with explanatory notes and data should be prepared
pressure test procedure
the pressure testing of newly constructed liquid pipelines and replaced segments of existing
pipelinesshould be performed in accordance with
ASME B31.4, 49 Code of Federal Regulations, Part 195 and any other applicable governmental
regulations.
Before the actual line filling operation, it is advisable to run a _________ in an effort to identify any
geometric abnormalities that may exist in the line prior to the test
Sizing pig, caliper or deformation tool
Personnel conducting a pressure test should keep:
Complete record of the test, including details of the test operation and events such as weather
variations, test failures, bleedoffs, repressurizations, and so forth
According to API 1169 an INSPECTOR is an individual qualified to monitor, assess, evaluate, verify,
discuss, decide, resolve, report, and document pipeline construction activities to ensure the
requirements of the design, drawings, specifications, regulations, and industry practices are being met
safely, efficiently, and in an environmentally sound manner.
true
Quality Assurance includes those activities focused on providing confidence that quality requirements
are consistently fulfilled
true
Inspectors are NOT empowered and expected to shut down any work on the basis of, but not limited
to
situations or activities that have occurred, are occurring, or may occur that could result in:
work schedule of the contractor
Inspection Personnel are expected to interact with representatives of newspapers, TV, or other media
seeking information
false
Inspectors should evaluate the following areas to avoid incidents and raise awareness of hazards,
except:
Traffic Congestion - at the local Walmart when a sale is in progress
According to API, Q1, Specification for Quality Programs, calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
, true
According to API, Q1, Specification for Quality Programs, calibration is a comparison to a standard of
known accuracy and making any needed adjustments.
management
Regarding training and awareness, the organization shall:
Provide for quality management system training and job training;
Maintain appropriate records of education, training, skills, and experience;
The quality management system documentation shall include the following, except for:
All federally required processes regarding the project at hand
Regarding design and development review, at suitable stages, review(s) shall be performed:
To evaluate the suitability, adequacy, and effectiveness of the results of design and development
stages to meet specified requirements;
To identify any problems and propose necessary actions;
The Contingency Plan shall include the following, at a minimum:
Actions required in response to significant risk scenarios to mitigate effects of disruptive incidents;
Identification and assignment of responsibilities and authorities;
Internal and external communication controls
Where arc welding is regularly carried out, adjacent walls and other surfaces shall have:
Low reflectivity to ultraviolet radiation
When using cleaning compounds prior to welding, __________ instructions shall be followed
manufacturers
Fire watchers shall be posted where welding or cutting is done and where a large fire might develop,
or
whenever any of the following conditions exist:
Proximity of Combustibles - Combustible materials in building construction or contents are closer
that a radius of 35 feet to the point of operation.
Openings - There are wall or floor openings within a radius of 35 feet which expose combustible
material in adjacent areas, including concealed spaces in walls, ceilings or floors.
Metal Walls and Pipes - Combustible materials adjacent to the opposite side of metal partitions,
walls, ceiling, or roofs, or in contact with pipes, and are likely to be ignited by conduction or radiation.
Cylinders of liquefied gases shall not be charged to more than _______ the maximum capacity by
weight
or pressure.
1/2
Unconnected cylinders shall be stored in an approved storage area, preferably indoors, but not near a
building entrance
false
