WITH CORRECT ANSWERS AND
QUESTIONS GRADED A+
ACM stands for - ANS-Asbestos Containing Material
1-6 mil polyethylene labeled bag in a 55 gal drum
what is not true? - ANS-signs must be posted, 20" x 30" stating, "asbestos work area, keep out"
which of the following wetting agents is recommended by the EPA? - ANS-50% polyoxyethylene ether
and 50% polyoxyetheylene ester
if using latex paint as a sealant, which is most true? - ANS-vehicle content of at least 60% by weight and
25% by weight vehicle resin
how many days must after a bid must an owner sign specs and have bond executed? - ANS-5 days
, you must have ___ when using a type c supplied air respirator - ANS-a reserve air supply
The operating agency for each public school building in which fraible asbestos containing materials have
been identified shall monitor airborne asbestos levels in each sampling area. For at least how many
hours during a period of normal activity must this monitoring be done? - ANS-it must be done for 8
hours
What portion of insurance coverage for medical exams and monitoring as required by law must the
contractor provide? - ANS-all of the cost
Responsibility for ACM control in a building is primarily that of the - ANS-owner
The category least suspected of releasing asbestos fibers into the air because of friability is - ANS-
miscellaneous products
The program manager can speed up the sampling process when preparing for a building inspection for
asbestos by revealing ACM in the - ANS-blueprints
Before plastic barriers are set up, the work area should be - ANS-wet cleaned
What percentage of Federal, commercial, and residential construction before 1970 contained asbestos
in pipe or boiler insulation? - ANS-20%
The efficiency of the negative air pressure unit or cabinet is determined by the - ANS-Magnehelic guage
and the manometer
Disposal bags are primarily made of which type of plastic? - ANS-A minimum of 6 mil
A contractor must sign the contract and execute the bonds _____ days after being awarded the bid -
ANS-5 days