Aviation Machinist Mate Week #3 MEGA
TEST 2024.
What are Technical Manuals?
Publications and other forms of documentation which contain instructions for the use
and maintenance.
What do Technical Manuals contain instructions for the use and maintenance of?
Weapons, Weapon Systems, Components, and Equipment.
What are the two types of Technical Manuals?
Operational and Maintenance
Operational Manuals
Contain descriptions of weapons systems with instructions for their effective use.
Maintenance Manuals
Contain a description of the weapons systems and instructions for their upkeep and
repair.
What are the two formatting styles of Technical Manuals?
Conventional and Work Package
Conventional
Arranged in traditional topic fashion by chapters and sections.
Work Package
An improvement over conventionally formatted technical manuals.
Why are Work Packages and improvement over Conventional?
For Organization, Comprehensibility, and Forms.
What are the two Technical Manual Numbering Systems?
The Conventional Numbering System and Technical Manual Identification Numbering
System (TMINS).
What are the four types of Technical Manual Distribution Formats?
Paper-Based, CD-ROM, Interactive Electronic Technical Manual (IETM), and Technical
Manuals Via the Internet.
Shall
Procedure is Mandatory.
Should
Procedure is recommended.
Will
Indicates futurity and never indicates any degree of requirement for application of a
procedure.
Warning
May result in injury or death.
Caution
May result in damage to equipment.
Note
Essential To Emphasize
What are the Categories of Updates to technical manuals?
, Interim Rapid Action Change, Rapid Action Change, Change, and Revision.
What is NAMP?
A maintenance program to provide a standardized methodology for maintenance
procedures.
What is NAMP identified as?
COMNAVAIRFORINIST 4790.2 (Series)
The NAMP's safety standards are established by...
The Chief Of Naval Operations (CNO)
What are the three levels of maintenance?
Naval Aviation Depot (NADEP), Intermediate Maintenance Activity, and Operational
Maintenance Activity.
What are the two main types of maintenance?
Rework and Upkeep.
What are the types of Inspections?
Daily, Turnaround, Special Inspection, Conditional, Phase, Acceptance, and Transfer.
What is NALCOMIS?
An automated management system that provides OMAs and IMAs with a modern, real
time, responsive, computer-based management information system
What are the objectives of NALCOMIS?
To Increase Aircraft Readiness, Reduce Administrative Burden, and Improve the quality
of up-line reporting.
What determines the user's ability to preform a specific function in NALCOMIS?
Special Maintenance Qualifications
Who approves the work order and assigns a Job Control Number (JCN) and
assign the work to a work center?
Maintenance Control
Who will assign a worker, and place the work order in work?
Work Center Supervisor
What is the purpose of VIDS/MAF?
To be used if the NALCOMIS is unavailable for use.
How many forms does a VIDS/MAF have?
Five!
What is the objective of the Naval Aviation Safety Program?
To establish an effective, aggressive, and continuous accident prevention program.
What are the goals of the Naval Aviation Safety Program?
To reduce death and injury while reducing loss and damage to all Navy/Marine material
from accidental causes.
Mishap
An unexpected and undesirable event that results in injury, loss, or damage.
What are the five factors that affect safety?
Work Related, Maintenance Support, Material Failure, Environmental, and
Administrative and Supervisory Factors.
What are shorting bars used for?
To discharge all voltages from de-energized equipment before maintenance is
preformed.
What are the types of Eye and Face Protection?
TEST 2024.
What are Technical Manuals?
Publications and other forms of documentation which contain instructions for the use
and maintenance.
What do Technical Manuals contain instructions for the use and maintenance of?
Weapons, Weapon Systems, Components, and Equipment.
What are the two types of Technical Manuals?
Operational and Maintenance
Operational Manuals
Contain descriptions of weapons systems with instructions for their effective use.
Maintenance Manuals
Contain a description of the weapons systems and instructions for their upkeep and
repair.
What are the two formatting styles of Technical Manuals?
Conventional and Work Package
Conventional
Arranged in traditional topic fashion by chapters and sections.
Work Package
An improvement over conventionally formatted technical manuals.
Why are Work Packages and improvement over Conventional?
For Organization, Comprehensibility, and Forms.
What are the two Technical Manual Numbering Systems?
The Conventional Numbering System and Technical Manual Identification Numbering
System (TMINS).
What are the four types of Technical Manual Distribution Formats?
Paper-Based, CD-ROM, Interactive Electronic Technical Manual (IETM), and Technical
Manuals Via the Internet.
Shall
Procedure is Mandatory.
Should
Procedure is recommended.
Will
Indicates futurity and never indicates any degree of requirement for application of a
procedure.
Warning
May result in injury or death.
Caution
May result in damage to equipment.
Note
Essential To Emphasize
What are the Categories of Updates to technical manuals?
, Interim Rapid Action Change, Rapid Action Change, Change, and Revision.
What is NAMP?
A maintenance program to provide a standardized methodology for maintenance
procedures.
What is NAMP identified as?
COMNAVAIRFORINIST 4790.2 (Series)
The NAMP's safety standards are established by...
The Chief Of Naval Operations (CNO)
What are the three levels of maintenance?
Naval Aviation Depot (NADEP), Intermediate Maintenance Activity, and Operational
Maintenance Activity.
What are the two main types of maintenance?
Rework and Upkeep.
What are the types of Inspections?
Daily, Turnaround, Special Inspection, Conditional, Phase, Acceptance, and Transfer.
What is NALCOMIS?
An automated management system that provides OMAs and IMAs with a modern, real
time, responsive, computer-based management information system
What are the objectives of NALCOMIS?
To Increase Aircraft Readiness, Reduce Administrative Burden, and Improve the quality
of up-line reporting.
What determines the user's ability to preform a specific function in NALCOMIS?
Special Maintenance Qualifications
Who approves the work order and assigns a Job Control Number (JCN) and
assign the work to a work center?
Maintenance Control
Who will assign a worker, and place the work order in work?
Work Center Supervisor
What is the purpose of VIDS/MAF?
To be used if the NALCOMIS is unavailable for use.
How many forms does a VIDS/MAF have?
Five!
What is the objective of the Naval Aviation Safety Program?
To establish an effective, aggressive, and continuous accident prevention program.
What are the goals of the Naval Aviation Safety Program?
To reduce death and injury while reducing loss and damage to all Navy/Marine material
from accidental causes.
Mishap
An unexpected and undesirable event that results in injury, loss, or damage.
What are the five factors that affect safety?
Work Related, Maintenance Support, Material Failure, Environmental, and
Administrative and Supervisory Factors.
What are shorting bars used for?
To discharge all voltages from de-energized equipment before maintenance is
preformed.
What are the types of Eye and Face Protection?
