CPD Exam By Previous Student (100)
Non Equation Questions
1. In uniform sloping drains, what is the formula used to determinate velocity?
A. Hydraulic Radius Formula
B. Manning Formula.
C. Darcy-Weisbach Formula.
D. Q = AV
B
2. This type of energy is defined as the energy of a body due to its elevation above a given
level:
A. Kinetic Energy.
B. Static Energy.
C. Potential Energy.
D. Residual Energy.
C
3. This storm calculation method calculates the peak stormwater runoff:
A. The rational method.
B. The Drainage fixture unit method.
C. The Syphonic storm drainage calculation.
D. The 100 year storm calculation.
A
4. Discharge from Rectangular Weir with End Contractions it is also know as :
A. The Francis Formula.
B. The Manning Formula.
C. The Darcy-Weisbach Formula.
D. The Weymouth Formula.
A
5. What does ASTM stands for?
A. American Science &Technical Materials.
B. American Standards & Testing Materials.
C. Association of Standards for Testing Materials.
D. American Society of Testing Materials.
D
,6. Within the Plumbing industry; what does the abbreviation ""HOA"" stands for??
A. Home Owners Association.
B. Holding orders Attached.
C. Hands-Off Automatic.
D. Hands on Application.
C
7. The Liquid leaking into a sewer is called:
A. Infiltration
B. Leakage
C. Drainage
D. Sewage
A
8. Fire Protection Standpipe system class of service is defined as:
A. Class-a, Class-b, & Class-c.
B. Class-Rl, Class-Rll, & Class-Rlll.
C. Class-l, Class-ll, & Class-lll.
D. Residential, Industrial, High Rise
C
9. The Drinking fountain water spout shall be located __ inches maximum above the floor for
units to be used by children.
A. 36
B. 24
C. 32
D. 30
D
10. An ADA handheld showerhead controlled by an on/off diverter and a non-positive shutoff
with a __-inch long hose shall be provided
A. 59
B. 60
C. 62
D. 72
A
11. Most solar water heating systems for buildings have two main parts:
A. Solar collector and a storage battery.
B. solar collector and automatic transfer switch.
C. Storage battery and automatic transfer switch.
D. Solar collector and a storage tank.
D
, 12. This is NOT a prime areas of concern must be addressed when planning and developing
geothermal energy systems:
A. Thermal loads to make the system economically viable.
B. Adequate temperature and flow rate.
C. Depth of water for required drilling extensions.
D. Competitive institutional processes.
C
13. For engineering purposes, value can be defined best by the following formula:
A. Value = Worth/Cost
B. Value = Cost- Valued engineering savings.
C. Value = Worth - Cost
D. Value = Cost- men hours
A
14. What are the two primary elements of establishing the cost of a design?
A. Portions of the design that can be value engineered, and less expensive manufacturers..
B. The product or material cost, and the labor cost.
C. Budget and Schedule.
D. Men worked hours and Overtime hours.
B
15. What are the two types of water flow?
A. Down & up.
B. Upstream and Downstream.
C. Gravity and Pumped.
D. Laminar and Turbulent.
D
16. The rate of change in length due to temperature is referred to as:
A. Expansion.
B. Stress rate.
C. The expansion coefficient.
D. The length coefficient.
C
17. Corrosion is the degradation of a material by its environment. In the case of metals,
corrosion is an ________ reaction between a metal and its environment.
A. Oxidation
B. Unhealthy.
C. Electrochemical.
Non Equation Questions
1. In uniform sloping drains, what is the formula used to determinate velocity?
A. Hydraulic Radius Formula
B. Manning Formula.
C. Darcy-Weisbach Formula.
D. Q = AV
B
2. This type of energy is defined as the energy of a body due to its elevation above a given
level:
A. Kinetic Energy.
B. Static Energy.
C. Potential Energy.
D. Residual Energy.
C
3. This storm calculation method calculates the peak stormwater runoff:
A. The rational method.
B. The Drainage fixture unit method.
C. The Syphonic storm drainage calculation.
D. The 100 year storm calculation.
A
4. Discharge from Rectangular Weir with End Contractions it is also know as :
A. The Francis Formula.
B. The Manning Formula.
C. The Darcy-Weisbach Formula.
D. The Weymouth Formula.
A
5. What does ASTM stands for?
A. American Science &Technical Materials.
B. American Standards & Testing Materials.
C. Association of Standards for Testing Materials.
D. American Society of Testing Materials.
D
,6. Within the Plumbing industry; what does the abbreviation ""HOA"" stands for??
A. Home Owners Association.
B. Holding orders Attached.
C. Hands-Off Automatic.
D. Hands on Application.
C
7. The Liquid leaking into a sewer is called:
A. Infiltration
B. Leakage
C. Drainage
D. Sewage
A
8. Fire Protection Standpipe system class of service is defined as:
A. Class-a, Class-b, & Class-c.
B. Class-Rl, Class-Rll, & Class-Rlll.
C. Class-l, Class-ll, & Class-lll.
D. Residential, Industrial, High Rise
C
9. The Drinking fountain water spout shall be located __ inches maximum above the floor for
units to be used by children.
A. 36
B. 24
C. 32
D. 30
D
10. An ADA handheld showerhead controlled by an on/off diverter and a non-positive shutoff
with a __-inch long hose shall be provided
A. 59
B. 60
C. 62
D. 72
A
11. Most solar water heating systems for buildings have two main parts:
A. Solar collector and a storage battery.
B. solar collector and automatic transfer switch.
C. Storage battery and automatic transfer switch.
D. Solar collector and a storage tank.
D
, 12. This is NOT a prime areas of concern must be addressed when planning and developing
geothermal energy systems:
A. Thermal loads to make the system economically viable.
B. Adequate temperature and flow rate.
C. Depth of water for required drilling extensions.
D. Competitive institutional processes.
C
13. For engineering purposes, value can be defined best by the following formula:
A. Value = Worth/Cost
B. Value = Cost- Valued engineering savings.
C. Value = Worth - Cost
D. Value = Cost- men hours
A
14. What are the two primary elements of establishing the cost of a design?
A. Portions of the design that can be value engineered, and less expensive manufacturers..
B. The product or material cost, and the labor cost.
C. Budget and Schedule.
D. Men worked hours and Overtime hours.
B
15. What are the two types of water flow?
A. Down & up.
B. Upstream and Downstream.
C. Gravity and Pumped.
D. Laminar and Turbulent.
D
16. The rate of change in length due to temperature is referred to as:
A. Expansion.
B. Stress rate.
C. The expansion coefficient.
D. The length coefficient.
C
17. Corrosion is the degradation of a material by its environment. In the case of metals,
corrosion is an ________ reaction between a metal and its environment.
A. Oxidation
B. Unhealthy.
C. Electrochemical.
