BICSI OSP
If lead to height ratio is between 1/2 and 3/4 and only 2 or 3 spans the head guy
should be_____ than suspension strand. - correct answer-One SIze Larger
Important set of deliverables - correct answer-Design documents
OSP cost variance - correct answer-10%
CSI 27
CSI 28
CSI 31
CSI 33
CSI26 - correct answer-Telecommunications
electrical safety and security'
Earth work
Utilities
Electrical
NAP groupings - correct answer-4,6,8,12
4 parts security - correct answer-Prevent, Detect,Alarm,Secure
3 components of EMI - correct answer-Unbalanced electromagnetic fields of the
power system, Coupling between power and telecommunications and susceptibility
of the tele system
Direct buried cables collects ground strikes with a distance determined by soil
resistance typically? - correct answer-6.6' to 19.7'
A reading of______ ampres is the best possible reading for any bonding conductor,
AC should be less than 1A and DC 500 Miliampres - correct answer-0
Maximum value for 2 point bonding in central offices? - correct answer-.1 Ohms
Trencher used in soft loamy soils or loose clay soils depths up to 5' 3' for smaller
trenchers - correct answer-Vibratory
Trencher used in tight soils, heavy clays or loose rock Depth sup to 5' - correct
answer-Static
Trenchers used in Hardend clay rock soil or adverse conditions - correct answer-Rip
plow
, Maximum connector loss reccomended - correct answer-.75 DB
____ have individual jackets for each tight buffered fiber.______ has one jacket and
is lower cost. - correct answer-Breakout, Distribution
_______ and ______ are not used after the first 24 binders. - correct answer-Violet
and slate
Load coil designs to counter the effects of capacitance buildup in loop lengths over?
- correct answer-5.5 KM
Baseband cabling used in lengths up to? - correct answer-328'
Uses a solid polymer that insulates each conducting wire ad is color coded and more
resistant to electrical surges and more tolerant to handle than PE-39 has 6 to 3000
Pairs - correct answer-PE-89
PE-39 has pair range of? - correct answer-25 to 4200 pair
What determines the maximum permissible end to end system attenuation in a given
fiber link? - correct answer-Average transmitter power and receiver sensitivity
By subtracting the passive cable system attenuation from link loss budget what value
is received? - correct answer-System performance margin
I
C
E
A - correct answer-I= Design
C= Insulation type
E- Conductor gauge
A- Sheath design
In planning OSP cabling,__ must be determined for? - correct answer-Cable
infrastructure
Class 7 pole breaking strength - correct answer-5335 N (1200Lb)
What should be used to keep a pole from leaning sideways when the load on a pole
is not large enough to warrant a guy? - correct answer-Ground braces
Guying attachment used at an in-line pole - correct answer-Tangent
If lead to height ratio is between 1/2 and 3/4 and only 2 or 3 spans the head guy
should be_____ than suspension strand. - correct answer-One SIze Larger
Important set of deliverables - correct answer-Design documents
OSP cost variance - correct answer-10%
CSI 27
CSI 28
CSI 31
CSI 33
CSI26 - correct answer-Telecommunications
electrical safety and security'
Earth work
Utilities
Electrical
NAP groupings - correct answer-4,6,8,12
4 parts security - correct answer-Prevent, Detect,Alarm,Secure
3 components of EMI - correct answer-Unbalanced electromagnetic fields of the
power system, Coupling between power and telecommunications and susceptibility
of the tele system
Direct buried cables collects ground strikes with a distance determined by soil
resistance typically? - correct answer-6.6' to 19.7'
A reading of______ ampres is the best possible reading for any bonding conductor,
AC should be less than 1A and DC 500 Miliampres - correct answer-0
Maximum value for 2 point bonding in central offices? - correct answer-.1 Ohms
Trencher used in soft loamy soils or loose clay soils depths up to 5' 3' for smaller
trenchers - correct answer-Vibratory
Trencher used in tight soils, heavy clays or loose rock Depth sup to 5' - correct
answer-Static
Trenchers used in Hardend clay rock soil or adverse conditions - correct answer-Rip
plow
, Maximum connector loss reccomended - correct answer-.75 DB
____ have individual jackets for each tight buffered fiber.______ has one jacket and
is lower cost. - correct answer-Breakout, Distribution
_______ and ______ are not used after the first 24 binders. - correct answer-Violet
and slate
Load coil designs to counter the effects of capacitance buildup in loop lengths over?
- correct answer-5.5 KM
Baseband cabling used in lengths up to? - correct answer-328'
Uses a solid polymer that insulates each conducting wire ad is color coded and more
resistant to electrical surges and more tolerant to handle than PE-39 has 6 to 3000
Pairs - correct answer-PE-89
PE-39 has pair range of? - correct answer-25 to 4200 pair
What determines the maximum permissible end to end system attenuation in a given
fiber link? - correct answer-Average transmitter power and receiver sensitivity
By subtracting the passive cable system attenuation from link loss budget what value
is received? - correct answer-System performance margin
I
C
E
A - correct answer-I= Design
C= Insulation type
E- Conductor gauge
A- Sheath design
In planning OSP cabling,__ must be determined for? - correct answer-Cable
infrastructure
Class 7 pole breaking strength - correct answer-5335 N (1200Lb)
What should be used to keep a pole from leaning sideways when the load on a pole
is not large enough to warrant a guy? - correct answer-Ground braces
Guying attachment used at an in-line pole - correct answer-Tangent
