DELL CLIENT ADVANCED 2023/2024 CORRECT AND VERIFIED ANSWERS GRADED A+

DELL CLIENT ADVANCED 2023/2024 CORRECT AND VERIFIED ANSWERS GRADED A+ 1.When the side cover of Precision Tower 7920 is not assembled, the system will still power on. False 2.On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED ? not Power light 3.We Import a Foreign configuration in a RAID Array, if: The array containing foreign configuration is in an Offline state 4.Select statements that are true about Trusted Platform Module (TPM) not The Trusted Platform Module (TPM) is used to generate and store keys 5.After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before re -assembling the side cover. However, system is not able to power on and displays LED error code of 4 -7. What could be the issue? The intrusion switch is triggered and power is cut -off. Install the side cover to de -activate the intrusion switch. 6.Before replacing any hardware, what is the recommended solution for the BSOD or system freezing? not Reseat the DIMMs 7.If an Edge Gateway is Blinking green after the diagnostics, what does it indicate? ePSA Pass 8.On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this indicates the drive is rebuilding False 9.In general, an Anti -Static Mat is used to prevent Electrostatic damage True 8.Onsite Services for Ruggedized Notebooks are limited to CRU parts and Service Assembly Parts. True 9.How many thermal performance control modes are there in Alienware Area 51m to support different user scenarios? not 1.0 10.Overclocking is the process of making a computer or component in a computer operate faster than specified by the manufacturer by modifying the system parameters True 11.In a PERC H730P controller, P stands for Performance True 12.iDRAC with Lifecycle Controller can be used for: not OS Deployment 13.A CAN (Controller Area Network) bus is a vehicle bus standard designed to allow micro controllers and devices to communicate with each other in applications without a host computer. True 14.Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins?