Questions With 100% Correct Answers
Code
Addresses the safety of persons, property and the environment associated with the ITS cabling
Installation
NEC
National electric code
Frequency conversion chart
One thousand hertz = 1KHz
One million Kilohertz = 1 MHz
One billion Megahertz = 1 GHz
NFPA
National Fire protection association
AHJ
Authorities having jurisdiction
TIA/EIA
- Telecommunications Industry association
- Electronic industries alliance
BICSI
- Building
- Industry
- Consulting
- Service
- International
Frequency
Optical pulses using cycles per second, 1 unit of hertz = 1 cycle per second
4hz = 4 cycles per second
Definition of transmission
The movement of information in the form of electrical or optical signals from one point to another
through a transport medium
Refraction
Bending of the light as it passes from one medium into another
MHz
- Quantifies the bandwidth of a cabling system in a frequency range
, - Information handling capabilities of the medium
Megabits
- transmission rate
- Number of bits information that can be transported over the medium(vehicles of the highway)
Anatomy of a fiber
- Core
- Cladding
- Coating
Attenuation =
The decrease in magnitude of transmission signal strength between points, expressed in decibel as
the ratio of out put to input signal
Attenuation [insertion loss] =
Light pulses traveling along fiber are subjected to loss due to absorption or scattering of the light
Intrinsic =
Controlled by the manufacture/expresses in decibels per-kilometer impacts the signal to reach the
receiver with sufficient power
Extrinsic =
Controlled by the installer/expresses in decibels per-kilometer impacts the signal to reach the receiver
with sufficient power
Attenuation loss =
- Expressed in decibels per kilometers
- Impacts the ability of the signal to reach the receiver with sufficient power
dBm =
Optical power referred to as 1 milliwatt of power
CWDM =
Coarse wave division multiplexing
DWDM =
Dense wave division multiplexing
APC
Angle polish connector
SCS =
Structured cabling system