Answers () (Verified Answers)
companies with strong safety cultures usually have lower?
Turnover
what is a statement regarding safety?
it's a learned behavior and attitude
poor lighting, excessive noise, and inadequate guards for moving parts are examples of?
unsafe conditions
the activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a?
job safety analysis JSA
a measure of the probability, consequences, and exposure related to an event is referred to as?
Risk
if there is a hole in the floor or a structure, the preferred method of protecting workers from falls is
to?
be guarded with marked flags or covered. (must be clearly marked)
.the D-ring or support point on a safety harness should be placed?
between the shoulder blades
a personal fall arrest system should be inspected monthly by a?
competent person
lanyards that have no shock-absorbing features are used for?
positioning and fall restraint.
when placing a ladder against a platform or roof the top of the ladder should be extended above the
point where the ladder touches the platform or roof by atleast?
3 feet (0.9 m)
when performing overhead work on scaffolding what protective measures must be taken to prevent
objects from falling and striking a person below?
use of toeboards, debris nets, catch platforms, or canopies
when stacking materials such as blocks or bricks, do not stack materials beyond a?
4:1 (4 to 1) ratio
what type of soil can benching not be used?
type c soil