API 510 Questions and Answers 100%
Pass
___________vessels—a vessel fabricated to a recognized construction code but
has lost its nameplate or stamping.
nonstandard vessels
1.1.2 Intent
The intent of this code is to specify the in-service inspection and condition-
monitoring program that is needed to determine the ____________ of pressure
vessels and pressure-relieving devices
Integrity
1.3 Recognized Technical Concepts:
For inspection planning and engineering assessment of in-service pressure
vessels, this inspection code recognizes the applicability of Fitness-For-Service
(FFS) assessment and risk-based inspection (RBI) methodologies. API
___________________ 1 provides detailed assessment procedures for specific
types of damage that are referenced in this code.
API 579-1/ASME FFS-1
API Recommended Practice _______ Damage Mechanisms Affecting Fixed
Equipment in the Refining Industry
AP1 571
API Recommended Practice _______ Integrity Operating Windows
AP1 584
API Recommended Practice _______ Safe Hot Tapping Practices for the
Petroleum and Petrochemical Industries
AP1 2201
______________ Standard for Qualification and Certification of Nondestructive
Testing Personnel
ASNT CP-189 2,
, API Recommended Practice _________ Pressure Equipment Integrity Incident
Investigations
AP1 585
___________ SP0170, Protection of Austenitic Stainless Steels and Other
Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During
Shutdown of Refinery Equipment
NACE SP0170
___________ is the Approval/agreement to perform a specific activity (e.g. repair)
prior to the activity being performed
Authorization
3.1.11
____________ is a person, acceptable to the owner/user, who has knowledge and
experience in corrosion damage mechanisms, metallurgy, materials selection,
and corrosion monitoring techniques.
corrosion specialist
3.1.15
____________ is an imperfection whose type or size exceeds the applicable
acceptance criteria and is therefore rejectable.
defect
_____________ A physical change in any component that has design implications
that affect the pressure-containing capability of a pressure vessel beyond the
scope described in existing data reports. The following should not be considered
alterations: any comparable or duplicate replacement, the addition of any
reinforced nozzle less than or equal to the size of existing reinforced nozzles, and
the addition of nozzles not requiring reinforcement.
alteration
_______________Any work not considered an alteration that removes and
replaces a major part of the pressure boundary other than a nozzle (e.g. replacing
part of the shell or replacing a vessel head). If any of the restorative work results
in a change to the design temperature, minimum allowable temperature (MAT), or
Pass
___________vessels—a vessel fabricated to a recognized construction code but
has lost its nameplate or stamping.
nonstandard vessels
1.1.2 Intent
The intent of this code is to specify the in-service inspection and condition-
monitoring program that is needed to determine the ____________ of pressure
vessels and pressure-relieving devices
Integrity
1.3 Recognized Technical Concepts:
For inspection planning and engineering assessment of in-service pressure
vessels, this inspection code recognizes the applicability of Fitness-For-Service
(FFS) assessment and risk-based inspection (RBI) methodologies. API
___________________ 1 provides detailed assessment procedures for specific
types of damage that are referenced in this code.
API 579-1/ASME FFS-1
API Recommended Practice _______ Damage Mechanisms Affecting Fixed
Equipment in the Refining Industry
AP1 571
API Recommended Practice _______ Integrity Operating Windows
AP1 584
API Recommended Practice _______ Safe Hot Tapping Practices for the
Petroleum and Petrochemical Industries
AP1 2201
______________ Standard for Qualification and Certification of Nondestructive
Testing Personnel
ASNT CP-189 2,
, API Recommended Practice _________ Pressure Equipment Integrity Incident
Investigations
AP1 585
___________ SP0170, Protection of Austenitic Stainless Steels and Other
Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During
Shutdown of Refinery Equipment
NACE SP0170
___________ is the Approval/agreement to perform a specific activity (e.g. repair)
prior to the activity being performed
Authorization
3.1.11
____________ is a person, acceptable to the owner/user, who has knowledge and
experience in corrosion damage mechanisms, metallurgy, materials selection,
and corrosion monitoring techniques.
corrosion specialist
3.1.15
____________ is an imperfection whose type or size exceeds the applicable
acceptance criteria and is therefore rejectable.
defect
_____________ A physical change in any component that has design implications
that affect the pressure-containing capability of a pressure vessel beyond the
scope described in existing data reports. The following should not be considered
alterations: any comparable or duplicate replacement, the addition of any
reinforced nozzle less than or equal to the size of existing reinforced nozzles, and
the addition of nozzles not requiring reinforcement.
alteration
_______________Any work not considered an alteration that removes and
replaces a major part of the pressure boundary other than a nozzle (e.g. replacing
part of the shell or replacing a vessel head). If any of the restorative work results
in a change to the design temperature, minimum allowable temperature (MAT), or
