Module 6-----NCCER Introduction to
Basic Rigging Test Review 36------54
The main connection fitting for chain slings is the - correct answer-master link
To form an endless-loop web sling, you must ----------- the ends together - correct
answer-splice
A ---------- is the distance it takes for one strand of wire rope that makes a complete turn
around the core. - correct answer-one-rope lay
A pulley system that has a mechanical advantage for lifting a load is a - correct answer-hoist
A -------------- is good for moving loads such as steel plates or concrete panels - correct
answer-lifting clamp
A --------- hitch is used when two or more slings are connected to a load on a single hook. -
correct answer-bridle
The way a sling is arranged to hold a load is called rigging configuration, or - correct
answer-hitch
A --------- is the distance between the master link of the sling to either the end fitting sling or
the lowest point on the basket - correct answer-sling reach
A ------------- is a single ring that attaches multiple slings to a hoist hook. - correct answer-bull
ring
A --------------- is a simple rope-and-pulley system used to lift loads. - correct answer-block
and tackle
Riggers use a -------- to help limit unwanted movement when the crane begins to move. -
correct answer-sling
A ----------------- is a group of wire wound around a center core. - correct answer-strand
A ------------- is used to attach a sling to a load. - correct answer-rigging hook
--------------------is the maximum load weight that a sling is designed to carry. - correct
answer-Rated capacity
An example of a ------------ is a synthetic sling that has a missing identification tag and it has
been punctured or crushed - correct answer-rejection criteria
Basic Rigging Test Review 36------54
The main connection fitting for chain slings is the - correct answer-master link
To form an endless-loop web sling, you must ----------- the ends together - correct
answer-splice
A ---------- is the distance it takes for one strand of wire rope that makes a complete turn
around the core. - correct answer-one-rope lay
A pulley system that has a mechanical advantage for lifting a load is a - correct answer-hoist
A -------------- is good for moving loads such as steel plates or concrete panels - correct
answer-lifting clamp
A --------- hitch is used when two or more slings are connected to a load on a single hook. -
correct answer-bridle
The way a sling is arranged to hold a load is called rigging configuration, or - correct
answer-hitch
A --------- is the distance between the master link of the sling to either the end fitting sling or
the lowest point on the basket - correct answer-sling reach
A ------------- is a single ring that attaches multiple slings to a hoist hook. - correct answer-bull
ring
A --------------- is a simple rope-and-pulley system used to lift loads. - correct answer-block
and tackle
Riggers use a -------- to help limit unwanted movement when the crane begins to move. -
correct answer-sling
A ----------------- is a group of wire wound around a center core. - correct answer-strand
A ------------- is used to attach a sling to a load. - correct answer-rigging hook
--------------------is the maximum load weight that a sling is designed to carry. - correct
answer-Rated capacity
An example of a ------------ is a synthetic sling that has a missing identification tag and it has
been punctured or crushed - correct answer-rejection criteria
