C-33 Trade: Painting and Decorating Questions
with 100% Correct Answers | Latest Version 2024
| Verified
If a spot of latex paint on wood remove it by - ✔✔Scraping with a knife
Natural shellac is derived from secretions of - ✔✔Lac insects
The proper way to treat stains caused by rusted nail heads is to - ✔✔Sand, countersink nail, prime , fill
and finish with two coats
The liquid portion of paint - ✔✔vehicle
Which is the preferred primer for knots in wood - ✔✔Shellac
Best undercoat for new wood casing - ✔✔Enamel
When should you apply a seaming roller - ✔✔Immediately
Which improves the opacity of paint - ✔✔Binder
A scale 1/4" refers to - ✔✔4'=1"
Which is best material to coat a wood deck - ✔✔Spar varnish
What is best material to fill in a crack in an interior wall - ✔✔Sparkle
Which of the following will give you the smoothest finish when painting a door with latex paint - ✔✔A
sprayer
, How long should you wait before painting after applying gypsum veneer plaster - ✔✔4 weeks
Why is breathable paint useful for exteriors - ✔✔It won't blister
Lacquer cannot be used over - ✔✔water based paint oil paint enamels
finishing redwood which materials would be used - ✔✔enamel, stain, varnish
If an unfinished job must remain masked for one week, what type of tape should use? - ✔✔painter's
blue tape
How do you prepare new wood for painting if it has weep and pitch? - ✔✔sealing
What causes overspray when using a spray gun? - ✔✔air pressure too high gun too far from surface
improper technique
What causes fluid leakage from the packing nut of a spray gun? - ✔✔packing nut is too loose packing is
worn or dry
How much will a # 417 spray tip cover if you spray 12" from the face of the wall? - ✔✔8" fan width
With what should you cover plants when you are painting in the hot sun? - ✔✔canvas drop cloth
What could be a problem when power washing? - ✔✔damage to the surface being washed too much
moisture inadequate cleaning
What is the surface area of a column that is 10 ft high(h) and 2 ft in diameter(d)? - ✔✔To get the surface
area of a column you must multiply the cirumference by the hight. ( 3.14x d x h= sq ft. )
with 100% Correct Answers | Latest Version 2024
| Verified
If a spot of latex paint on wood remove it by - ✔✔Scraping with a knife
Natural shellac is derived from secretions of - ✔✔Lac insects
The proper way to treat stains caused by rusted nail heads is to - ✔✔Sand, countersink nail, prime , fill
and finish with two coats
The liquid portion of paint - ✔✔vehicle
Which is the preferred primer for knots in wood - ✔✔Shellac
Best undercoat for new wood casing - ✔✔Enamel
When should you apply a seaming roller - ✔✔Immediately
Which improves the opacity of paint - ✔✔Binder
A scale 1/4" refers to - ✔✔4'=1"
Which is best material to coat a wood deck - ✔✔Spar varnish
What is best material to fill in a crack in an interior wall - ✔✔Sparkle
Which of the following will give you the smoothest finish when painting a door with latex paint - ✔✔A
sprayer
, How long should you wait before painting after applying gypsum veneer plaster - ✔✔4 weeks
Why is breathable paint useful for exteriors - ✔✔It won't blister
Lacquer cannot be used over - ✔✔water based paint oil paint enamels
finishing redwood which materials would be used - ✔✔enamel, stain, varnish
If an unfinished job must remain masked for one week, what type of tape should use? - ✔✔painter's
blue tape
How do you prepare new wood for painting if it has weep and pitch? - ✔✔sealing
What causes overspray when using a spray gun? - ✔✔air pressure too high gun too far from surface
improper technique
What causes fluid leakage from the packing nut of a spray gun? - ✔✔packing nut is too loose packing is
worn or dry
How much will a # 417 spray tip cover if you spray 12" from the face of the wall? - ✔✔8" fan width
With what should you cover plants when you are painting in the hot sun? - ✔✔canvas drop cloth
What could be a problem when power washing? - ✔✔damage to the surface being washed too much
moisture inadequate cleaning
What is the surface area of a column that is 10 ft high(h) and 2 ft in diameter(d)? - ✔✔To get the surface
area of a column you must multiply the cirumference by the hight. ( 3.14x d x h= sq ft. )
